2.B Fabricat ion of Large-Aspect-Ratio, PIast ic-Coated, Metal-Shell Targets
ثبت نشده
چکیده
Fig. 7 Time-dependent coronal temperatures deduced from Figs. 2 and 6. The approximate location of the incident laser pulse is also shown. shown in Fig. 6 for both 0.5 and 1 ns irradiation. The on-target intensities were l o t 5 and 5 x l o T 4 Wlcmz, respectively. The deduced temperatures (0.8 to 1.8 keV) correspondvery closely to those calculated with 1 -D and 2-D hydro-codes such as LLE's LILAC and SAGE.
منابع مشابه
High-aspect ratio metal tips attached to atomic force microscopy cantilevers with controlled angle, length, and radius for electrostatic force microscopy.
We demonstrate a method to fabricate a high-aspect ratio metal tip attached to microfabricated cantilevers with controlled angle, length, and radius, for use in electrostatic force microscopy. A metal wire, after gluing it into a guiding slot that is cut into the cantilever, is shaped into a long, thin tip using a focused ion beam. The high-aspect ratio results in considerable reduction of the ...
متن کاملEnhanced wettability and electrolyte uptake of coated commercial polypropylene separators with inorganic nanopowders for application in lithium-ion battery
In this research, inorganic material type and content influence on coating of commercially available polypropylene (PP) separator were studied for improving its performance and safety as lithium ion battery separator. Heat-resistant nanopowders of Al2O3, SiO2 and ZrO2 were coated using polyvinylidene fluoride (PVDF) binder. Coating effects on the separators morphology, wettability, high tempera...
متن کاملInterfacial Mechanics of Carbon
Heterogeneous nanostructures may offer better or new properties that are not originally present in constituting components by judiciously combining two or more different materials. For example, silicon coating on carbon nanotubes (CNTs) improves the thermal stability of carbon nanotubes by acting as a protective fi lm, [ 1 ] and silicon-coated CNT composites have been proposed as promising lith...
متن کاملNon-conductive ferromagnets based on core double-shell nanoparticles for radio-electric applications
Two fabrication schemes of magnetic metal-polymer nanocomposites films are described. The nanocomposites are made of graphene-coated cobalt nanoparticles embedded in a polystyrene matrix. Scheme 1 uses non-covalent chemistry while scheme 2 involves covalent bonding with radicals. Preservation of the net-moment of cobalt and electrical insulation are achieved by means of a core double-shell stru...
متن کاملMaskless shaping of gold stud bumps as high aspect ratio microstructures
Micro/nanoimprinting is a simple and economical way of patterning polymeric structures over large areas. This paper seeks to extend this technique to fabricate three dimensional (3D) metallic microstructures, even in trenches and constrained areas using a flip chip bonder in conjunction with a wire bonder. In this two step process, gold stud bumps were placed first on sputtered metal at appropr...
متن کامل