Tracking Control for an Underactuated Two-Dimensional Overhead Crane
نویسنده
چکیده
In this paper, the tracking control problem is considered for the payload transportation with an underactuated twodimensional overhead crane. Two sliding mode controllers are designed to perform the trajectory tracking. One is proposed to control hoisting and lowering the suspended payload, and the other one is proposed to control both trolley positioning and payload swaying. Considering the second sliding mode controller is used to control two degrees of freedom (DOFs), a fuzzy inference algorithm is proposed to dynamically adjust the coupling factor between the two DOFs. The two controllers make the payload track a predefined trajectory and be safely transported as fast and accurately as possible with a small swing angle, and then place the payload at the desired position. Simulations are performed with the proposed controllers and the results show their effectiveness.
منابع مشابه
Adaptive Tracking Control for an Overhead Crane System
This paper proposes an adaptive control method for an underactuated overhead crane system. To improve the transferring efficiency and enhance the security of the crane system, the trolley is required to reach the desired position as fast as possible, while the swing of payload needs to be within an acceptable domain. To achieve these objectives, a novel twostep design strategy consisting of a t...
متن کاملApplication of Independent Joint Control Strategy for Discrete-Time Servo Control of Overhead Cranes
In this study, a new servo control system is presented for the overhead crane based on discrete-time state feedback approach. It provides both robust tracking and load swing suppression. Inspired from independent joint and computed torque control in robot manipulator field, a new model is derived in which the crane actuators are considered as the main plant. The crane nonlinearities are then tr...
متن کاملA PID Tuning Method for Tracking Control of an Underactuated Gantry Crane
Abstract By the current research, a PID tuning procedure is developed to control of an overhead crane. To enable the crane to reach a desired position, a controller design strategy must be used. This work presents a simple and efficient enough approach to control of the overhead crane based on designing a PID controller. Ziegler-Nichols method is used to initiate gains setting for PID controlle...
متن کاملNonlinear Coupling Control Laws for an Underactuated Overhead Crane System
In this paper, we consider the regulation control problem for an underactuated overhead crane system. Motivated by recent passivitybased controllers for underactuated systems, we design several controllers that asymptotically regulate the planar gantry position and the payload angle. Specifically, utilizing LaSalle’s invariant set theorem, we first illustrate how a simple proportional–derivativ...
متن کاملOn the Adaptive Tracking Control of 3-D Overhead Crane Systems
For low cost, easy assembly and less maintenance, overhead crane systems have been widely used for material transportation in many industrial applications. Due to the requirements of high positioning accuracy, small swing angle, short transportation time, and high safety, both motion and stabilization control for an overhead crane system becomes an interesting issue in the field of control tech...
متن کامل