Assessment of First Wall and Blanket Options with the Use of Liquid Breeder
نویسندگان
چکیده
General Atomics, P.O. Box 85608, San Diego, California 92186-5608, [email protected] 1Fusion Nuclear Technology Consulting, Linkenheim, Germany 2University of Wisconsin, Madison, Wisconsin 3University of California, Los Angeles, California 4Argonne National Laboratory, Argonne, Illinois 5INEEL, Idaho Falls, Idaho 6University of California, San Diego, California 7University of California, Berkeley, California 8Oak Ridge National Laboratory, Oak Ridge, Tennessee
منابع مشابه
Numerical analysis of MHD flow and heat transfer in a poloidal channel of the DCLL blanket with a SiCf/SiC flow channel insert
MHD flow and heat transfer have been analyzed for a front poloidal channel in the outboard module of a Dual Coolant Lithium Lead (DCLL) blanket, with a flow channel insert made of a silicon carbide composite. The US reference DCLL blanket module [C. Wong, S. Malang, M. Sawan, S. Smolentsev, S. Majumdar, B. Merrill, D.K. Sze, N. Morley, S. Sharafat, P. Fogarty, M. Dagher, P. Peterson, H. Zhao, S...
متن کاملAn overview of dual coolant Pb–17Li breeder first wall and blanket concept development for the US ITER-TBM design
An attractive blanket concept for the fusion reactor is the dual coolant Pb–17Li liquid (DCLL) breeder design. Reduced activation ferritic steel (RAFS) is used as the structural material. Helium is used to cool the first wall and blanket structure, and the self-cooled breeder Pb–17Li is circulated for power conversion and for tritium breeding. A SiCf/SiC composite insert is used as the magnetoh...
متن کاملUS Plans and Strategy for ITER Blanket Testing
Testing blanket concepts in the integrated fusion environment is one of the principal objectives of ITER. Blanket test modules will be inserted in ITER from Day 1 of its operation and will provide the first experimental data on the feasibility of the D-T cycle for fusion. With the US rejoining ITER, the US community has decided to have strong participation in the ITER Test Blanket Module (TBM) ...
متن کاملUWFDM-1362 Mobile Tiles for Inertial Fusion First Wall/Blanket
A conceptually simple first wall (FW) and blanket design for an inertial fusion system based on utilizing mobile FW tiles is presented. Using these tiles that are periodically removed, annealed, and reinstalled, tritium retention and surface erosion concerns for inertial fusion FW could be mitigated. A conceptual configuration has been developed with consideration for laser beam port accommodat...
متن کاملSolid breeder thermal transient under purge-line-break accidents
The breeder thermal performances under a purge line break have been analyzed for two blanket design options: a blanket design using a packed breeder bed and a blanket design using a sintered breeder product. Under a purge line break open to a vacuum environment, the packed bed breeder temperature exceeds its operating temperature limit at a faster rate than that of the sintered breeder blanket ...
متن کامل