A MONTE CARLO MODEL FOR PREDICTING THE EROSION RATE OF EB PVD TBCs
نویسنده
چکیده
Since the introduction of electron beam (EB) physical vapour deposition (PVD) thermal barrier coatings (TBCs) and their application to moving components in the hot gas stream, erosion has become a prime concern. EB PVD TBCs, due to their unique columnar microstructure are far more strain tolerant than their plasma sprayed (PS) counter parts and can thus be used under more exacting operating conditions. It is under these operating conditions that erosion of the coated components is of primary importance.
منابع مشابه
Some Observations on Erosion Mechanisms of Eb Pvd Tbcs
Following the successful application of Electron Beam (EB) Physical Vapour Deposition (PVD) Thermal Barrier Coatings (TBCs) to moving parts of turbine engines the erosion resistance of these coatings has been of interest among researchers. However, although there are a number of papers on the erosion rate of these coatings, little has been reported on their erosion mechanism. This paper provide...
متن کاملErosion, Corrosion and Erosion-Corrosion of EB PVD Thermal Barrier Coatings
Electron beam (EB) physical vapour deposited (PVD) thermal barrier coatings (TBCs) have been used in gas turbine engines for a number of years. The primary mode of failure is attributed to oxidation of the bondcoat and growth of the thermally grown oxide (TGO), the alumina scale that forms on the bondcoat and to which the ceramic top coat adheres. Once the TGO reaches a critical thickness the T...
متن کاملNovel Thermal Barrier Coatings Produced by Axial Suspension Plasma Spray
Ceramic Thermal Barrier Coatings (TBCs) on superalloy components are being used successfully in land-based gas turbine and aircraft engines. These coatings are generally made by either air plasma spraying (APS) or electron beam physical vapour deposition (EB-PVD). In general, EB-PVD TBCs have superior durability due to the columnar structure, but they are very expensive compared to APS TBCs. EB...
متن کاملThermal Conductivity Analysis and Lifetime Testing of Suspension Plasma-Sprayed Thermal Barrier Coatings
Suspension plasma spraying (SPS) has become an interesting method for the production of thermal barrier coatings for gas turbine components. The development of the SPS process has led to structures with segmented vertical cracks or column-like structures that can imitate strain-tolerant air plasma spraying (APS) or electron beam physical vapor deposition (EB-PVD) coatings. Additionally, SPS coa...
متن کامل