Modular design and testing for anti-lock brake actuation and control using a scaled vehicle system
نویسندگان
چکیده
A unique decoupling feature in frictional disk brake mechanisms, derived through kinematic analysis, enables modularised design of an Anti-lock Braking System (ABS) into a sliding mode system that specifies reference brake torque and a tracking brake actuator controller. Modelling of brake actuation, vehicle dynamics, and control design are described for a scaled vehicle system. The overall control scheme is evaluated by hardware-in-theloop testing of the electromechanical brake system, and experimental results for two braking scenarios illustrate the benefits of the modular control design scheme and its impact on practical hardware-in-the-loop implementation.
منابع مشابه
Hydraulic anti-lock, anti-skid braking system using fuzzy controller
To maintain the stability trajectory of vehicles under critical driving conditions, anti lock-anti skid controllers, consisting of four anti-lock sub-controllers for each wheel and two anti-skid sub-controllers for left and right pair wheels have been separately designed. Wheel and body systems have been simulated with seven degrees of freedom to evaluate the proper functioning of controllers. ...
متن کاملطراحی سیستم کنترل ABS با در نظر گرفتن کنترل حرکت کناری به روش ترکیبی PID و SMC
Control Systems such as Anti Lock Brake Systems (ABS) and Traction Control Systems (TCS) are vastly used in most vehicles as to enhance the safety of the systems. These systems have many virtues on controlling the dynamics of vehicles, but they only control the longitudinal dynamics of the vehicle directly and the lateral dynamics of vehicle is not controlled because they do not receive any fee...
متن کاملDesign of an anti-lock regenerative braking system for a series hybrid electric vehicle
In this paper, an adaptive rule based controller for an anti-lock regenerative braking system (ARBS) of a series hybrid electric bus (SHEB) has been proposed. The proposed controller integrates the regenerative braking and wheel anti-lock functions by controlling the electric motor of the hybrid vehicle, without using any conventional mechanical anti-lock braking system. The performance of the ...
متن کاملAn adaptive modified fuzzy-sliding mode longitudinal control design and simulation for vehicles equipped with ABS system
In order to improve the safety and longitudinal stability of a vehicle equipped with standard ABS system, this paper, analyzes the basic principles of vehicles stability and proposes a control strategy based on fuzzy adaptive control which will adjust PID gain parameters, using genetic algorithm. A linear three-degree-of-freedom (DOF) vehicle model was set up in Simulink and the stability test ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2008