IC/96/132 United Nations Educational Scientific and Cultural Organization and International Atomic Energy Agency INTERNATIONAL CENTRE FOR THEORETICAL PHYSICS DERIVATION OF DICHROMATED GELATIN HOLOGRAMS FROM AGFA 8E75HD PLATES AND FABRICATION OF HOLOGRAPHIC FABRY-PEROT ETALON
نویسندگان
چکیده
The characteristics of diffraction efficiency and resolution of dichromated gelatin films derived from Agfa 8E75 HD plates by modified preparing and processing methods are presented. Using these films, fabricating of holographic Fabry-Perot etalon has been demonstrated and characteristic fringes of the Fabry-Perot effect have been observed.
منابع مشابه
Optimized spatial frequency response in silver halide sensitized gelatin.
One of the most important characteristics in the fabrication of high-efficiency, low-noise holographic optical elements is the spatial frequency response of the holographic recording materials. Dichromated gelatin (DCG) is a well-known recording material with high efficiency at high frequencies. On the other hand, silver halide sensitized gelatin (SHSG) is a process that improves the results in...
متن کاملPrintable Nanophotonic Devices via Holographic Laser Ablation.
Holography plays a significant role in applications such as data storage, light trapping, security, and biosensors. However, conventional fabrication methods remain time-consuming, costly, and complex, limiting the fabrication of holograms and their extensive use. Here, we demonstrate a single-pulse laser ablation technique to write parallel surface gratings and Fresnel zone plates. We utilized...
متن کاملApplications of computer-generated holograms for interferometric measurement of large aspheric optics
Interferometric optical testing using computer-generated holograms (CGH’s) has proven to give highly accurate measurements of aspheric surfaces. New applications of CGH interferometry were developed to support the fabrication of the large, steep mirrors required by the next generation ground-based telescopes. A new test to certify null correctors was designed and implemented that uses small CGH...
متن کاملAFM investigations of the nanoscale roughness of polymer replicas
The polymer materials are widely used in replication technologies. Recently different methods such as polymer imprinting, casting, hot embossing, injection molding were successfully used for polymer replication of the different surface structures with nanometer scale elements [1-4]. However, most investigations are connected only with resolution studies and directed at fabrication of sub-micron...
متن کاملHigh-efficiency Fresnel zone plates for hard X-rays by 100 keV e-beam lithography and electroplating
The fabrication and characterization of Fresnel zone plates (FZPs) for hard X-ray microscopy applications are reported. High-quality 500 nm- and 1 µm-thick Au FZPs with outermost zone widths down to 50 nm and 70 nm, respectively, and with diameters up to 600 µm were fabricated. The diffraction efficiencies of the fabricated FZPs were measured for a wide range of X-ray energies (2.8-13.2 keV) sh...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2005