Modelling, Parameter Estimation and Validation of a 300w Pem Fuel Cell System
نویسندگان
چکیده
In this paper a 300W PEM FC Stack dynamic model is developed and implemented in MATLAB/Simulink. Using semi-empirical equations for modelling a Proton Exchange Membrane (PEM) fuel cell is proposed for providing a tool for the design and analysis of fuel cell stack systems. The modelling results are compared with experimental results. The comparison shows good agreements between the modelling results and experimental data. The model could be used in PEM fuel cell control related studies.
منابع مشابه
A New Maximum Power Point Tracking Method for PEM Fuel Cells Based On Water Cycle Algorithm
Maximum Power Point (MPP) tracker has an important role in the performance of fuel cell (FC) systems improvement. Tow parameters which have effect on the Fuel cell output power are temperature and membrane water. So contents make the MPP change by with variations in each parameter. In this paper, a new maximum power point tracking (MPPT) method for Proton Exchange Membrane (PEM) fuel cell is pr...
متن کاملEnergy Management Simulation in a PEM Fuel Cell System
In this research the simulation of an air independent Proton Exchange Membrane Fuel Cell (PEMFC) propulsion system was taken into consideration. The system consists of several parts including PEM fuel cell stack, metal hydride and liquid oxygen (LOX) tanks, and also pre-heaters of oxygen and hydrogen gases along with other heat exchangers, to ensure proper operation of system. The heat recovery...
متن کاملتحلیل انرژی و اگزرژی یک سیستم تولید همزمان کوچک بر پایۀ پیل سوختی پلیمری برای سرمایش جذبی
In this article a CCHP system has been proposed for recovering waste heat of PEM fuel cell and this system can be used for residential applications. Main components of the system are PEM fuel cell, absorption chiller, fuel processor and heat storage tank. Electrochemical equations of PEM have been modeled by MATLAB and the chiller, fuel processor and boiler have been modeled by EES. In addition...
متن کاملWater Management in the Cathode Side of a PEM Fuel Cell
A one dimensional isothermal mathematical modeling of cathode side of a Proton Exchange Membrane (PEM) fuel cell is developed for the water management problem. Water transport is investigated in both cathode Gas Diffusion Layer (GDL) and membrane through solving appropriate equations for fluid flow and mass transport in GDL and water transport within the membrane. The gaseous mixture flowing in...
متن کاملImpact of anisotropy level of gas diffusion layer on the temperature distribution of a PEM fuel cell cathode electrode
Proton exchange membrane (PEM) fuel cells being employed in fuel cell vehicles (FCVs) are promising power generators producing electric power from fuel stream via porous electrodes. Structure of carbon paper gas diffusion layers (GDLs) applying in the porous electrodes can have a great influence on the PEM fuel cell performance and distribution of temperature, especially at the cathode side whe...
متن کامل