Optimal Control of a Swirl Stabilized Spray Combustor Using System Identification Approach
نویسندگان
چکیده
منابع مشابه
Simultaneous planar laser-induced incandescence, OH planar laser-induced fluorescence, and droplet Mie scattering in swirl-stabilized spray flames.
Simultaneous planar laser-induced incandescence, hydroxyl radical planar laser-induced fluorescence, and droplet Mie scattering are used to study the instantaneous flame structure and soot formation process in an atmospheric pressure, swirl-stabilized, liquid-fueled, model gas-turbine combustor. Optimal excitation and detection schemes to maximize single-shot signals and avoid interferences fro...
متن کاملSpray Flame and Exhaust Jet Characteristics of a Pressurized Swirl Combustor
Title of Document: SPRAY FLAME AND EXHAUST JET CHARACTERISTICS OF A PRESSURIZED SWIRL COMBUSTOR Martin Brendan Linck, Doctor of Philosophy, 2006 Directed By: Professor Ashwani K. Gupta Department of Mechanical Engineering This work describes an investigation of swirl-stabilized flames, created in a combustor featuring co-annular swirling airflows, under unenclosed, enclosed, and submerged condi...
متن کاملEffect of swirl on combustion dynamics in a lean-premixed swirl-stabilized combustor
The effect of inlet swirl on the flow development and combustion dynamics in a lean-premixed swirl-stabilized combustor has been numerically investigated using a large-eddy-simulation (LES) technique along with a level-set flamelet library approach. Results indicate that when the inlet swirl number exceeds a critical value, a vortex-breakdown-induced central toroidal recirculation zone is estab...
متن کاملOn the Dependence of Soot Formation and Combustion on Swirling Combustion Furnaces: Measurement and Simulation
Soot concentration distribution is investigated both numerically and experimentally in methane-air diffusion flame. The experimental work is conducted with a cylindrical swirl stabilized combustor. Filter paper technique is used to measure soot volume fraction inside the combustor. The numerical simulation is based on the solution of the fully-coupled conservation equations for swirling turbule...
متن کاملEffects of cooling flow on the flow structure and acoustic oscillation in a swirl-stabilized combustor. Part II: Acoustic analysis
The effects of cooling flow injection on the flow development and acoustic oscillation in a premixed swirl-stabilized combustor had been numerically investigated using 3D large-eddy simulation. Three different cases, including one with no injection and two with cooling flow injection (5, 20 m s), were simulated. With injection of cooling flow-through slits in the combustor wall, the absolute ve...
متن کامل