Mechanical expansion of steel tubing as a solution to leaky wellbores.

نویسندگان

  • Mileva Radonjic
  • Darko Kupresan
چکیده

Wellbore cement, a procedural component of wellbore completion operations, primarily provides zonal isolation and mechanical support of the metal pipe (casing), and protects metal components from corrosive fluids. These are essential for uncompromised wellbore integrity. Cements can undergo multiple forms of failure, such as debonding at the cement/rock and cement/metal interfaces, fracturing, and defects within the cement matrix. Failures and defects within the cement will ultimately lead to fluid migration, resulting in inter-zonal fluid migration and premature well abandonment. Currently, there are over 1.8 million operating wells worldwide and over one third of these wells have leak related problems defined as Sustained Casing Pressure (SCP). The focus of this research was to develop an experimental setup at bench-scale to explore the effect of mechanical manipulation of wellbore casing-cement composite samples as a potential technology for the remediation of gas leaks. The experimental methodology utilized in this study enabled formation of an impermeable seal at the pipe/cement interface in a simulated wellbore system. Successful nitrogen gas flow-through measurements demonstrated that an existing microannulus was sealed at laboratory experimental conditions and fluid flow prevented by mechanical manipulation of the metal/cement composite sample. Furthermore, this methodology can be applied not only for the remediation of leaky wellbores, but also in plugging and abandonment procedures as well as wellbore completions technology, and potentially preventing negative impacts of wellbores on subsurface and surface environments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

AN INVESTIGATION ON THE PERFORMANCE OF AN IMIDAZOLINE BASED COMMERCIAL CORROSION INHIBITOR ON CO2 CORROSION OF GAS-WELL TUBING STEEL BY EIS TECHNIQUE

Abstract: The performance of an Imidazoline based commercial corrosion inhibitor in CO2 corrosion of a gas-well tubing steel was studied by employing Electrochemical Impedance Spectroscopy (EIS) technique. Inhibitor performance was investigated by means of its efficiency at various concentration and also its behavior at various exposure time. EIS results showed that inhibitor interaction to...

متن کامل

Inhibitive Assesment of Stearamide as a Corrosion Inhibitor for Mild Steel in HCl Solution

In this study effect of Stearamide as a corrosion inhibitor for mild steel in hydrochloric acid media was investigated employing various electrochemical techniques include potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and liner polarization resistance (LPR). In view of the fact that Stearamide is an insoluble compound in water, its inhibitive effect was examined by ...

متن کامل

The Effect of Header Geometry on Temperature Distribution in Cold Rolling

The objectives in the cold rolling process include improved sheet surface quality, enhanced steel mechanical strength, and better solidification operations. Given the increasing demand for higher steel...

متن کامل

Effect of Thermomechanical Processing on the Microstructure and Mechanical Properties of a Duplex Stainless Steel

Duplex stainless steels (DSSS) have a microstructure composed of ferrite and austenite phases that gives them a very good combination of mechanical and corrosion properties. These steels are desirable for many applications in the chemical and petrochemical industries. In the present study, a type of stainless steel was cast, solution annealed at 1200°C for 60 min and then quenched in water. Ini...

متن کامل

Effect of heat treatment on microstructural properties of three-layer sheet aluminum magnesium - aluminum - stainless steel

Metal coating, metal materials are of two or more layers. The coating metals are widely used in industry. These sheets or saving performance and cost effective solution or both the user. Performance coating metals according to usage in structural applications, settings thermal expansion of the thermo-mechanical control (thermostat), electrical, magnetic, corrosion resistant, flowering and decor...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of visualized experiments : JoVE

دوره 93  شماره 

صفحات  -

تاریخ انتشار 2014