Enhanced Performance in Quantum Dot Solar Cell with TiOx and N2 Doped TiOx Interlayers by
نویسندگان
چکیده
منابع مشابه
A Low Resistance Calcium/Reduced Titania Passivated Contact for High Efficiency Crystalline Silicon Solar Cells
Advances in the efficiency of crystalline silicon (c-Si) photovoltaic (PV) devices above the long-held record efficiency value of 25% have all come from solar cell architectures with passivated contacts fabricated on n-type silicon.[1] The most successful devices to date have a silicon heterojunction (SHJ) cell structure, featuring a thin intrinsic amorphous silicon (a-Si) film that passivates ...
متن کاملLow Cost “ Plastic ” Solar Cells : A Dream or Reality ? ? ? :
8:30 AM Plenary Low Cost “Plastic” Solar Cells: A Dream or Reality???: Alan Heeger1; 1University of California, Santa Barbara Polymer solar cells with power conversion efficiencies in excess of 5% are demonstrated using bulk heterojunction materials. Spatial Fourier transform methods have been used to study and optimize the morphology. Light harvesting has been improved by using a novel low-ban...
متن کاملEnhanced efficiency of inverted polymer solar cells by using solution-processed TiOx/CsOx cathode buffer layer
In this work, a double-buffer film of TiOx coated with CsOx (TiOx/CsOx) was solution prepared to be applied in poly(3-hexylthiophene):indene-C60 bisadduct (P3HT:ICBA) and P3HT:[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) inverted polymer solar cells (PSCs). Compared with TiOx films and CsOx films, the TiOx/CsOx double-buffer film exhibited a favorable energy-level alignment among TiOx, CsO...
متن کاملCorrosion-Resistant PEFC Cathode Catalysts Based on Sub-Stoichiometric Titanium Oxide Supports
Corrosion of carbonaceous catalyst support materials such as carbon black has been known for conventional Pt/C catalysts, which is recognized as one of the cause of catalyst degradation [1]. To improve the durability of cathode catalyst, especially at high potentials during startstop periods, a more oxidation-resistant catalyst support at high potentials (>1.0 V) is desired for automotive and r...
متن کاملDye-sensitized solar cell with a pair of carbon-based electrodes
We have fabricated a dye-sensitized solar cell (DSSC) with a pair of carbon-based electrodes using a transparent, conductive carbon nanotubes (CNTs) film modified with ultra-thin titanium-sub-oxide (TiOx) as the working electrode and a bilayer of conductive CNTs and carbon black as the counter electrode. Without TiOx modification, the DSSC is almost nonfunctional whereas the power conversion ef...
متن کامل