Analysis of vector models in quantification of artifacts produced by standard prosthetic inlays in Cone-Beam Computed Tomography (CBCT)--a preliminary study.

نویسندگان

  • Ingrid Różyło-Kalinowska
  • Sławomir Miechowicz
  • Katarzyna Sarna-Boś
  • Janusz Borowicz
  • Paweł Kalinowski
چکیده

Cone-beam computed tomography (CBCT) is a relatively new, but highly efficient imaging method applied first in dentistry in 1998. However, the quality of the obtained slices depends among other things on artifacts generated by dental restorations as well as orthodontic and prosthetic appliances. The aim of the study was to quantify the artifacts produced by standard prosthetic inlays in CBCT images. The material consisted of 17 standard prosthetic inlays mounted in dental roots embedded in resin. The samples were examined by means of a large field of view CBCT unit, Galileos (Sirona, Germany), at 85 kV and 14 mAs. The analysis was performed using Able 3DDoctor software for data in the CT raster space as well as by means of Materialise Magics software for generated vector models (STL). The masks generated in the raster space included the area of the inlays together with image artifacts. The region of interest (ROI) of the raster space is a set of voxels from a selected range of Hounsfield units (109-3071). Ceramic inlay with zirconium dioxide (Cera Post) as well as epoxy resin inlay including silica fibers enriched with zirconium (Easy Post) produced the most intense artifacts. The smallest image distortions were created by titanium inlays, both passive (Harald Nordin) and active (Flexi Flange). Inlays containing zirconium generated the strongest artifacts, thus leading to the greatest distortions in the CBCT images. Carbon fiber inlay did not considerably affect the image quality.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Artifact reduction techniques in Cone Beam Computed Tomography (CBCT) imaging modality

Introduction: Cone beam computed tomography (CBCT) was introduced and became more common based on its low cost, fast image procedure rate and low radiation dose compared to CT. This imaging modality improved diagnostic and treatment-planning procedures by providing three-dimensional information with greatly reduced level of radiation dose compared to 2D dental imaging modalitie...

متن کامل

Artifacts of Titanium, Zirconium, and Binary Titanium-Zirconium Abutments in Compute Tomography, Cone Beam Computed Tomography, and Magnetic Resonance Imaging

Aim: The aim of this in vitro study was to evaluate imaging artifacts induced by Titanium, Zirconium, Titanium-Zirconium abutments in CT, MRI and CBCT imaging modalities.Methods: A 4×8mm titanium fixture was inserted in a dry human mandible. Titanium, Zirconium and Titanium–Zirconium abutments measuring 10.5 mm in height are located on the fixture, one by one. Each abutment was scan...

متن کامل

Evaluation of Metal Artifacts in Cone Beam Computed Tomography by Metal Supported Porcelain Crowns Using Different FOV and Localizations: An In Vitro Study

Introduction: Metal-supported porcelain crowns (MSPC) and bridge restorations may be present in the mouths of patients undergoing CBCT imaging. Artifacts that are caused by these MSPCs may adversely affect image quality. The aim of this study is to determine the effect of different FOV (field of view) and localization in FOV on metal artifacts caused by MSPC. Methods:</...

متن کامل

Comparison of Diagnostic Accuracy of Cone Beam Computed Tomography and Digital Radiography for Detection of Vertical Root Fractures with and without Gutta Percha

  Objective: Diagnosis of vertical root fractures (VRFs) is critical in endodontics which most of the times occurs in endodontically treated teeth with root canal fillings such as gutta percha. Despite Cone Beam Computed Tomography (CBCT) has significantly enhanced image quality compared to digital radiography (DR) which aid the diagnosis, artifacts has remained as a problem in VRF detection . ...

متن کامل

Incidental dentomaxillofacial findings on cone beam computed tomography images of Iranian population

BACKGROUND AND AIM: The present study aimed to assess the nature and prevalence of incidental findings in cone beam computed tomography (CBCT) images of oral and maxillofacial patients. METHODS: In this cross-sectional study, 773 CBCT samples were retrieved from archives of a private oral and maxillofacial radiology center. Any findings that were not related to the reason of CBCT request was re...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Postepy higieny i medycyny doswiadczalnej

دوره 68  شماره 

صفحات  -

تاریخ انتشار 2014