3D Sensing and Mapping for a Tracked Mobile Robot with a Movable Laser Ranger Finder

نویسنده

  • A Toyomi
چکیده

This paper presents a sensing system for 3D sensing and mapping by a tracked mobile robot with an arm-type sensor movable unit and a laser range finder (LRF). The arm-type sensor movable unit is mounted on the robot and the LRF is installed at the end of the unit. This system enables the sensor to change position and orientation so that it avoids occlusions according to terrain by this mechanism. This sensing system is also able to change the height of the LRF by keeping its orientation flat for efficient sensing. In this kind of mapping, it may be difficult for moving robot to apply mapping algorithms such as the iterative closest point (ICP) because sets of the 2D data at each sensor height may be distant in a common surface. In order for this kind of mapping, the authors therefore applied interpolation to generate plausible model data for ICP. The results of several experiments provided validity of these kinds of sensing and mapping in this sensing system. Keywords—Laser Range Finder, Arm-Type Sensor Movable Unit, Tracked Mobile Robot, 3D Mapping.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Robotic Indoor 3D Mapping System Using a 2D Laser Range Finder Mounted on a Rotating Four-Bar Linkage of a Mobile Platform

This paper describes our work in developing a 3D robotic mapping system composed by an experimental mobile platform equipped with a rotating laser range finder (LRF). For the purpose of obtaining more complete 3D scans of the environment, we design, construct and calibrate a crank‐rocker four‐bar linkage so that a LRF mounted on it could undergo repetitive rotational motion b...

متن کامل

An autonomous mobile robot with a 3D laser range finder for 3D exploration and digitalization of indoor environments

Digital 3D models of the environment are needed in rescue and inspection robotics, facility managements and architecture. This paper presents an automatic system for gaging and digitalization of 3D indoor environments. It consists of an autonomous mobile robot, a reliable 3D laser range finder and three elaborated software modules. The first module, a fast variant of the Iterative Closest Point...

متن کامل

Mobile Robot 3D Perception and Mapping with Multi-Resolution Occupancy Lists

Many real-world applications require mobile robots to be able to implement 3D perception and mapping. This paper proposes a novel mechanism for augmenting a traditional 2D laser range finder to produce 3D scans. The range data is stored in occupancy lists which are aligned to produce 3D maps by a multi-resolution particle filter. Experimental results are presented to show the feasibility and go...

متن کامل

A 3D laser range finder for autonomous mobile robots

This paper presents a high quality, low cost 3D laser range finder designed for autonomous mobile systems. The 3D laser is built on the base of a 2D range finder by the extension with a standard servo. The servo is controlled by a computer running RT-Linux. The scan resolution ( 5 cm) for a complete 3D scan of an area of 150 (h) 90 (v) degree is up to 115000 points and can be grabbed in 12 seco...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012