Utilization of biomass for blast furnace in Sweden
نویسنده
چکیده
منابع مشابه
Reduction of Costs of Iron Production by Changing Parameters of the Mixed Blast-furnace Wind
The blast-furnace process consists of a large number of processes that are physicochemical, thermal and mechanical interconnected processes. In addition to main processes consisting of iron oxides reduction, pig iron and slag melt creation, also realised are fuel combustion, gas flow, charge and melt flow, dissociation and other reactions in the solid and liquid phases. Inputs to the blast-furn...
متن کاملTechnical Effects of Air Cooled Blast Furnace Slag on Asphalt Mixtures
Air cooled blast furnace slag is a by product made of gradually air cooled molten blast furnace slag and is often stored in stockpiles near the iron mills and usually occupy a wide area around the iron mills. From this perspective the further use of these materials can have its own merits. Air cooled blast furnace slag can be used in asphalt mixtures because of their proper frictional propertie...
متن کاملDevelopment of an Online Blast Furnace Burden Profile Measuring System
Gas permeability in a blast furnace is directly influenced by the burden profile, which is the result of the charging angle collocation. An obviously increment in both iron-making productivity and furnace campaign life will be observed in a high heat utilization furnace with uniform gas permeability. An online burden profile measuring device without gas leakage risks and heavy maintaining load ...
متن کاملElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
متن کاملTitanium in the Process of Smelting Pig Iron with an Increased Silicon Content
In connection with future utilization of magnetite titanium ores deposited in Poland in the region of Suwałki the test were performed to get information regarding the influence of titan and vanadium admixtures on the quality of pig iron and the run of blast furnace process. As a blast furnace charge, there were used magnetite titanium concentrates similar to the ores deposited in the Suwałki re...
متن کامل