Design And Implementation of 8T SRAM cell for Analysis of DC Noise Margin during Write Operation
نویسندگان
چکیده
This paper focuses on the DC noise margin analysis and read/write failure analysis of the proposed 8T low power SRAM cell. In the proposed structure two voltage sources, one connected with the Bit line and the other connected with the Bit bar line for reducing the voltage swing during the switching activity. These two extra voltage sources will control the voltage swing on the output node and improve the stability. DC noise margin has been calculated by using loop gain technique and comparison made with that of conventional 6T SRAM justify the efficiency of the superiority of the proposed SRAM structure. Read and Write failure analyses are also done by using Monte-Carlo simulation. Simulation has been done in 65nm CMOS technology with 1 volt of power supply. Analog and schematic simulations have been done in 65nm environment with the help of Microwind3.1 by using BSimM4 model.
منابع مشابه
A Novel 8T SRAM Cell with Improved Read and Write Margins
A highly stable 8T SRAM cell is presented to improve the Static Noise Margin (SNM). The proposed 8T SRAM cell uses a single-bit line structure to perform read and write operation. The design enhances the write ability by breaking-up the feedback loop of the inverter pair. It also improves the read stability by eliminating the effects from the bit-line. The simulations show that the proposed 8T ...
متن کاملComparative Parametric Analysis for Stability of 6t and 8t Sram Cell
As the technology is improving , channel length of MOSFET is scaling down. In this environment stability of SRAM becomes the major concern for future technology. Static noise margin (SNM)[1] plays a vital role in stability of SRAM[2]. This paper gives an introduction to the “8T SRAM cell”[3]. It includes the Implementation, characterization and analysis of 8T SRAM cell and its comparison with t...
متن کاملLow Leakage Asynchronous PP based Single Ended 8T SRAM bit-cell at 45nm CMOS Technology
Low power SRAM memory designs has become challenging for portable device applications. Semiconductor/ VLSI industry growth has exponentially demanding low leakage power SRAM designs for high performance chips and microprocessors. To get optimized standard cell memory design for battery operated devices at deep sub micron CMOS technology, a low leakage Asynchronous 8T SRAM is proposed. In this p...
متن کامل8T Double-Ended Read-Decoupled SRAM Cell
Scaling of SRAM cell beyond 65-nm poses a serious threat to the stability of the cell and is a cause of major concern for the upcoming technologies. Due to random dopant fluctuation (RDF) and other process parameter variations, the cell turns out to be unstable. In this paper, an 8T (8Transistor) SRAM cell is proposed which offers enhanced data stability during read operation. While reading, th...
متن کاملDesign and Verification of Low Power SRAM using 8T SRAM Cell Approach
SRAM cell stability will be a primary concern for future technologies due to variability and decreasing power supply voltages. Advances in chip designing have made possible the design of chips at high integration and fast performance. Lowering power consumption and increasing noise margin have become two central topics in every state of SRAM designs.The Conventional 6T SRAM cell is very much pr...
متن کامل