Initial Results from the Front End Test Stand High Performance H Ion Source at Ral
نویسندگان
چکیده
The RAL Front End Test Stand (FETS) [1] is being constructed to demonstrate a chopped H beam of up to 60 mA at 3 MeV with 50 pps and sufficiently high beam quality for future high-power proton accelerators (HPPA). High power proton accelerators with beam powers in the several megawatt range have many applications including drivers for spallation neutron sources, neutrino factories, waste transmuters and tritium production facilities. The aim of the FETS project is to demonstrate that chopped low energy beams of high quality can be produced and is intended to allow generic experiments exploring a variety of operational conditions. This paper details the first results from the initial operation of the ion source.
منابع مشابه
Performance of the Low Energy Beam Transport at the Ral Front End Test Stand
The Front End Test Stand (FETS) at the Rutherford Appleton Laboratory (RAL) is intended to demonstrate the early stages of acceleration (up to 3MeV) and beam chopping required for high power proton accelerators, including proton drivers for pulsed neutron spallation sources and neutrino factories. A Low Energy Beam Transport (LEBT), consisting of three solenoids and four drift sections, is used...
متن کاملStatus of the Fets Project
The Front End Test Stand (FETS) under construction at RAL is a demonstrator for front end systems of a future high power proton linac. Possible applications include a linac upgrade for the ISIS spallation neutron source, new future neutron sources, accelerator driven sub-critical systems, high energy physics proton drivers etc. Designed to deliver a 60mA H-minus beam at 3MeV with a 10% duty fac...
متن کاملStatus of the Ral Front End Test Stand
The Front End Test Stand (FETS) under construction at the Rutherford Appleton Laboratory is the UK's contribution to research into the next generation of High Power Proton Accelerators (HPPAs). HPPAs are an essential part of any future Spallation Neutron Source, Neutrino Factory, Muon Collider, Accelerator Driven Sub-critical System, Waste Transmuter etc. FETS will demonstrate a high quality, h...
متن کاملInitial study of the optical spectrum of the ISIS H- ion source plasma.
The front end test stand is being constructed at the Rutherford Appleton Laboratory, with the aim of producing a 60 mA, 2 ms, 50 Hz, perfectly chopped H(-) ion beam. To meet the beam requirements, a more detailed understanding of the ion source plasma is required. To this end, an initial study is made of the optical spectrum of the plasma using a digital spectrometer. The atomic and molecular e...
متن کاملParticle Dynamics Calculations and Emittance Measurements at the Fets *
High power proton accelerators in the MW range have many applications including drivers for spallation neutron sources, neutrino factories, transmuters (for transmuting long-lived nuclear waste products) and energy amplifiers. In order to contribute to the development of HPPAs, to prepare the way for an ISIS upgrade and to contribute to the UK design effort on neutrino factories, a front end te...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010