Phase behavior and rheological properties of polyamine-rich complexes for direct-write assembly.

نویسندگان

  • Mingjie Xu
  • Jennifer A Lewis
چکیده

Polyamine-rich complexes are developed for microscale patterning of planar and 3-D structures by direct ink writing. The complexes are formed by mixing poly(allylamine) hydrochloride and poly(acrylic acid) sodium salt in water in a nonstoichiometric ratio. Their phase behavior, rheological properties, and coagulation behavior in alcohol-water reservoirs are characterized. Direct comparisons are made between these complexes, which are based on mixtures of linear polyelectrolytes, and prior observations of complexes composed of linear and highly branched chains. [Gratson, G. M.; Xu, M.; Lewis, J. A. Nature 2004, 428, 386. Gratson, G. M.; Lewis, J. A. Langmuir 2005, 21, 457-464.] The optimal polyamine-rich ink and reservoir compositions are identified for direct-write assembly of wavy, gradient, and 3-D microperiodic architectures.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Phase behavior and rheological properties of polyelectrolyte inks for direct-write assembly.

Three-dimensional (3-D) structures with micron-sized features have been fabricated via the direct-write assembly of polyelectrolyte inks. By mixing oppositely charged species under solution conditions that promote polyelectrolyte exchange reactions, we have created concentrated fluids capable of flowing through microscale deposition nozzles. Ink deposition into an alcohol/water coagulation rese...

متن کامل

Evaluation of Heterogeneous Densification, Anisotropic Shrinkage and Rheological Behavior of Ceramic Materials during Liquid Phase Sintering by Numerical-Experimental Procedure

The effective shear and bulk viscosity, as well as dynamic viscosity, describe the rheological properties of the ceramic body during the liquid phase sintering process. The rheological parameters depend on the physical and thermo-mechanical characteristics of the material such as relative density, temperature, grain size, diffusion coefficient, and activation energy. Thermal behavior of the cer...

متن کامل

Modeling the Rheological Properties of Carboxymethylcellulose Stabilized O/W Emulsions Based on Sunflower Oil and Tallow Fat

The aim of this research was to assess the effect of fat type and concentration as well as the continuous phase viscosity on the rheological properties of an oil-in-water (O/W) emulsion. Thus, sunflower oil and tallow fat were used as the dispersed phase of the emulsion both at 10 and 50% (w/v) and CMC solutions (at 0.1, 0.3 and 0.5% w/v) were acted as the continuous phase. CMC solutions and em...

متن کامل

The Effect of Polyethylene Glycol and Nanoclay on the Rheological Behavior of Dispersing Cationic Polyurethane Nanocomposites

Cationic waterborne polyurethane as a new dispersing polymer was synthesized by using relatively hydrophilic polyols. Dispersing cationic polyurethane (DCPU) nanocomposites were prepared using isophorone diisocyanate (IPDI), polyethylene glycol (PEG) with different molecular weights (Mn=200, 400, 600,and1000 g/mol), N-methyl diethanolamine (MDEA), dibutyltin dilaurate (DBTDL) and different perc...

متن کامل

Identification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures

Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 23 25  شماره 

صفحات  -

تاریخ انتشار 2007