High - Performance Routing for Field - Programmable Gate Arrays

Field Programmable Gate Array–based Implementation of an Improved Algorithm for Objects Distance Measurement (TECHNICAL NOTE)

In this work, the design of a low-cost, field programmable gate array (FPGA)-based digital hardware platform that implements image processing algorithms for real-time distance measurement is presented. Using embedded development kit (EDK) tools from Xilinx, the system is developed on a spartan3 / xc3s400, one of the common and low cost field programmable gate arrays from the Xilinx Spartan fami...

Design and Implementation of Field Programmable Gate Array Based Baseband Processor for Passive Radio Frequency Identification Tag (TECHNICAL NOTE)

In this paper, an Ultra High Frequency (UHF) base band processor for a passive tag is presented. It proposes a Radio Frequency Identification (RFID) tag digital base band architecture which is compatible with the EPC C C2/ISO18000-6B protocol. Several design approaches such as clock gating technique, clock strobe design and clock management are used. In order to reduce the area Decimal Matrix C...

A Novel Routing Architecture for Field-Programmable Gate-Arrays

FPGA Placement and Routing Algorithm: A Survey

Unlike ASICs, FPGAs have routing fabrics that are pre-manufactured. And because of this prefabrication, FPGAs hardly can achieve high clock frequencies which offered by ASICs. Thus, there is a need for better FPGA timing performance. And design automation or computer-aided design (CAD) tools for field programmable gate arrays (FPGAs) have played a very critical role over the past decades for FP...

Segmented Routing for Speed-Performance and Routability in Field-Programmable Gate Arrays

This paper addresses several issues involved for routing in Field-Programmable Gate Arrays (FPGAs) that have both horizontal and vertical routing channels, with wire segments of various lengths. Routing is studied by using CAD routing tools to map a set of benchmark circuits into FPGAs, and measuring the effects that various parameters of the CAD tools have on the implementation of the circuits...