Stress Analysis of Plate With Oblique Hole
نویسندگان
چکیده
13 Abstract-In this study, the wok is carried out to analyzed, the stresses of plate with oblique hole with the Finite Element Analysis. Stress analysis of a series of flat plates with oblique holes subjected to axial tension has been carried out using the finite element method (FEM). Different plate hole diameter-width ratios, angles of hole obliquity have been considered to provide stress concentration factors at such holes. The work covers plate hole diameterwidth (d/w) ratios from 0.1 to 0.9, hole obliquity angles from 0 to 80 and inclination of hole axis in widthwise, lengthwise and diagonal wise direction, 30 direction and 60 direction.
منابع مشابه
The mixed mode fracture mechanics in a hole plate bonded with two dissimilar plane
In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...
متن کاملStudy of The Effect of Hole Location on Stress Analysis of a Plate Subjected to Uni-axial Load by Using Numerical and Exact Solution
In the present study, stress analysis and explicit solution of rectangular plate with arbitrarily located circular hole, subjected to linear normal stresses on two opposite edges, has been investigated. Airy function and hoop stresses occurring at the edge of the circular have been computed. In this method 2D dimension elasticity and Airy stress function was used. The present method for explici...
متن کاملStress intensity factor at the hole-edge cracks tips in a finite plate
In the current research work, the problem of fracture mechanics in a plate with a central hole under tensile loading is studied. The stress intensity factors are calculated for a finite plate containing two symmetrical hole-edge cracks. The problem is solved by two different methods, namely the finite element method and the FRANC software analysis. At first the finite element method is used and...
متن کاملFinite Plate with Circular and Square Hole under Partial Loading
In this paper a general analytical solution is obtained to find stress distribution in a finite elastic plate with a circular or square hole subjected to arbitrary biaxial partial loading using modified boundary condition by assuming plane stress conditions. The method employed is based on solution of circular hole in finite rectangular plate. This plate is mapped to circular ones and the parti...
متن کاملDetermination of Optimal Parameters for Finite Plates with a Quasi-Square Hole
This paper aims at optimizing the parameters involved in stress analysis of perforated plates, in order to achieve the least amount of stress around the square-shaped holes located in a finite isotropic plate using metaheuristic optimization algorithms. Metaheuristics may be classified into three main classes: evolutionary, physics-based, and swarm intelligence algorithms. This research uses Ge...
متن کامل