Harvesting Energy Using a Thin Unimorph Prestressed Bender: Geometrical Effects
نویسندگان
چکیده
Mathematical models and circuitry necessary for optimal energy conversion have been developed for piezoelectric devices because of their ability to convert mechanical energy to electrical energy. The piezoelectric device that is the focus of this study is a curved, thin unimorph prestressed bender. This device consists of layers of piezoelectric material, polyimide, and metal bonded at high temperatures. Effects of its layer composition and geometry on energy harvesting and actuation are investigated. Through this investigation, a method for developing empirical relationships is established and it is demonstrated that an actuator can be engineered so that the same energy output could be obtained with different materials by adjusting relevant parameters.
منابع مشابه
Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester
The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectri...
متن کاملThickness ratio and d33 effects on flexible piezoelectric unimorph energy conversion
Piezoelectric unimorphs are bilayer structures where a blanket piezoelectric film (with top and bottom electrodes) is uniformly laminated on an inactive but flexible substrate. Because of their simple construction and flexibility, unimorphs are widely used as a key element in flexible sensors and actuators. The response of a unimorph is governed by the material properties of the film and the su...
متن کاملPiezoelectric Vibration Energy Harvesting Characteristics of Barium Titanate Laminates
This paper studies the vibration energy harvesting characteristics of poled barium titanate (BT) unimorph cantilevers both analytically and experimentally. The unimorph cantilever consists of the BT layer and Cu shim, and the BT layer has sensing, grounding and driving electrodes. The output voltage of the cantilever excited by bending vibration was predicted by three dimensional finite element...
متن کاملShape and geometrical parameter effects of a bimorph piezoelectric beam on energy harvesting performance
In this paper, the shape influence of piezoelectric beams including triangle, trapezoid, rectangle, inverted trapezoid, convex parabola, concave parabola, and comb-shaped (a combination of two triangular beams with a connector of 4 mm length) are addressed and analyzed by FEM. The analysis is performed for a bimorph piezoelectric beam. The analyzed parameters include the beam length, thickness ...
متن کاملEnergy Harvesting from Vibrating Piezo-Electric Structures
The process of capturing the energy from a system’s environment or surrounding and converting it into usable electrical energy is termed as energy harvesting. One form of energy harvesting is to employ piezoelectric materials to harvest energy from vibrating structures. These materials have the ability to absorb the mechanical energy and transform it into electrical energy that can be used to p...
متن کامل