[Bonding of veneering resin and dental alloy with 4-META/MMA-TBB opaque resin. Adhesive durability of surface treated Au-Ag-Pd alloy].
نویسندگان
چکیده
Bonding between laboratory light-cured composite and surface treated Au-Ag-Pd alloy was investigated using newly developed 4-META/MMA-TBB opaque resin. Shear bond strength after 20,000 thermocycles obtained from heated alloy with this method was 25.1 MPa. Ion-coated specimen showed 25.6 MPa after 50,000 thermocycles with decrease in bond strength being small. Ferric chloride treated specimen, however, detached from alloy-opaque interface with lowest bond strength. An X-ray photo-electron spectroscopic analysis of ferric chloride treated specimen revealed increase in silver chloride and oxide, which affected bonding between opaque resin and Au-Ag-Pd alloy.
منابع مشابه
Adhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding.
New dental precious metal alloys for resin bonding without alloy surface modification were developed by adding base metals (In, Zn, or Sn). Before this, binary alloys of Au, Ag, Cu, or Pd containing In, Zn, or Sn were studied for water durability and bonding strength with 4-META resin. The adhesion ability of the binary alloys was improved by adding In equivalent to 15% of Au content, Zn equiva...
متن کاملEffect of metal primers and tarnish treatment on bonding between dental alloys and veneer resin
PURPOSE The aim of this study was to evaluate the effect of metal primers on the bonding of dental alloys and veneer resin. Polyvinylpyrrolidone solution's tarnish effect on bonding strength was also investigated. MATERIALS AND METHODS Disk-shape metal specimens (diameter 8 mm, thickness 1.5 mm) were made from 3 kinds of alloy (Co-Cr, Ti and Au-Ag-Pd alloy) and divided into 4 groups per each ...
متن کاملBonding and wear characteristics of a tri-n-butylborane initiated adhesive resin filled with pre-polymerized composite particles.
This study evaluated the wear characteristics and bonding to silver-palladium-copper-gold (Ag-Pd-Cu-Au) alloy of an acrylic resin that was filled with pre-polymerized composite particles and initiated with tri-n-butylborane (TBB) derivative (Bondfill). Three methyl methacrylate (MMA)-based resins (Bondfill, Super-Bond, and Multi-Bond II) and a microfilled composite restorative material (Metafil...
متن کاملLong-term durability of root-end sealing with 4-MEtA/MMA-TBB resin.
The purpose of this study was to compare root-end sealing using 4-META/MMA-TBB resin with that using conventional retrograde root filling technique, and thereby determine if 4-META/MMA-TBB resin offers long-term prevention against dye leakage from the root canal of human teeth. Thirty-five teeth had the apical 2.5 mm of the root resected. In the Sealing (SB) group, 4-META/MMA-TBB resin was appl...
متن کاملEvaluation of thiouracil-based adhesive systems for bonding cast silver-palladium-copper-gold alloy.
This study aimed to evaluate the effect of adhesive systems based on a thiouracil monomer on bonding to silver-palladium-copper-gold (Ag-Pd-Cu-Au) alloy (Castwell M.C.12). Disk specimens were cast from the alloy and then air-abraded with alumina. The disks were bonded using six bonding systems selected from four primers and three luting materials. Shear bond strengths were determined both befor...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nihon Hotetsu Shika Gakkai zasshi
دوره 32 6 شماره
صفحات -
تاریخ انتشار 1988