Numerical Study on Fabrication Tolerance of Half-Ridge InP Polarization Converters

Integrated InP polarization converters based on half-ridge structure are studied numerically. We demonstrate that the fabrication tolerance of the half-ridge structure can be extended significantly by introducing a slope at the ridge side and optimizing the thickness of the residual InGaAsP layer. High polarization conversion over 90% is achieved with the broad range of the waveguide width from 705 to 915 nm, corresponding to a factor-of-two or larger improvement in the fabrication tolerance compared with that of the conventional polarization converters. Finally we present a simple fabrication procedure of this newly proposed structure, where the thickness of the residual InGaAsP layer is controlled precisely by using a thin etch-stop layer. key words: Polarization converters, fabrication tolerances, monolithic integration, polarization-multiplexing, photonic integrated circuits