Performance enhancement of mechanical power amplifier
نویسنده
چکیده
ARTICLE INFO In many applications it is required to control a large output load using a relatively low control force. To satisfy such purposes, device like mechanical power amplifier can be used which generally gives very fast response. As per the requirement of the system, power can be instantaneously available from continuously rotating drums of mechanical power amplifier. This project will focus on the computation of amplification factor of mechanical power amplifier for different rope material like leather, woven cotton and steel rope. This study will be carried out for determination of optimum performance of mechanical power amplifier. Keywords— Mechanical Power Amplifier, Capstan Principle, Rope, Drum, Motor, Gear train, lay shaft. Article History Received :18 th November 2015 Received in revised form :
منابع مشابه
Performance Enhancement and Environmental Impact Analysis of a Solar Chimney Power Plant: Twenty-four-hour Simulation in Climate Condition of Isfahan Province, Iran
The aims of this study are to enhance the performance of a solar chimney power plant (SCPP), investigate utilization of thermal energy storage (TES) and analyze the environmental impact of the SCPP in providence of Isfahan, Iran. To achieve these goals, multi-stage numerical simulations during twenty-four hours of a day are performed in climate condition of Isfahan province (central region of I...
متن کاملA Low Power Low Voltage Rail to Rail Constant gm Differential Amplifier with 150 dB CMRR and Enhanced Frequency Performance
This paper proposes a low voltage (±0.55V supply voltage) low power (44.65µW) high common mode rejection ratio (CMRR) differential amplifier (d.a.) with rail to rail input common mode range (ICMR), constant transconductance (gm) and enhanced frequency performance. Its high performance is obtained using a simple negative averaging method so that it cancels out the common mode input signals at th...
متن کاملAnalysis and design of a CMOS current reused cascaded distributed amplifier with optimum noise performance
In this paper, analysis, simulation and design of a distributed amplifier (DA) with 0.13µm CMOS technology in the frequency range of 3-40 GHz is presented. Gain cell is a current reused circuit which is optimum in gain, noise figure, bandwidth and also power dissipation. To improve the noise performance in the frequency range of interest, a T-matching low pass filter LC network which is utilize...
متن کاملEnhancement Performance New Generation of CPU Cooling System Using Water-AL2O3 Nanofluid
By increase in the power of computer systems and enhanced power of the components and their temperature, including the central processing unit (CPU), cooling just by the air is not effective and there is need for more powerful systems to cool down and increase the power of the cooling system. In this article simulation of the heat exchanger material of the fluid cooling system has been studied ...
متن کاملHigh Speed Low Power Output Buffer amplifier for large-size LCD Applications
The present paper Performance improvement in high speed low power out put Buffer amplifier for large –LCD applications. The proposed buffer achieves high-speed driving performance while drawing a low quiescent current during static operation. The circuit offers enhanced slewing capabilities with limited power consumption by exploiting a slew detector which monitors the output voltage of the inp...
متن کامل