Ultrasmall Microfabricated Laser Cavities
نویسندگان
چکیده
searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggesstions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington VA, 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any oenalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
منابع مشابه
Femtotesla atomic magnetometry in a microfabricated vapor cell.
We describe an optically pumped 87Rb magnetometer with 5 fT/Hz(1/2) sensitivity when operated in the spin-exchange relaxation free (SERF) regime. The magnetometer uses a microfabricated vapor cell consisting of a cavity etched in a 1 mm thick silicon wafer with anodically bonded Pyrex windows. The measurement volume of the magnetometer is 1 mm3, defined by the overlap region of a circularly pol...
متن کاملRoom temperature continuous wave operation and controlled spontaneous emission in ultrasmall photonic crystal nanolaser.
Photonic crystal slab enables us to form an ultrasmall laser cavity with a modal volume close to the diffraction limit of light. However, the thermal resistance of such nanolasers, as high as 10(6) K/W, has prevented continuous-wave operation at room temperature. The present paper reports on the first successful continuous-wave operation at room temperature for the smallest nanolaser reported t...
متن کاملSingle mode optofluidic distributed feedback dye laser.
Single frequency lasing from organic dye solutions on a monolithic poly(dimethylsiloxane) (PDMS) elastomer chip is demonstrated. The laser cavity consists of a single mode liquid core/PDMS cladding channel waveguide and a phase shifted 15th order distributed feedback (DFB) structure. A 1mM solution of Rhodamine 6G in a methanol and ethylene glycol mixture was used as the gain medium. Using 6 na...
متن کاملUltrasmall mode volume plasmonic nanodisk resonators.
We study the resonant modes of nanoscale disk resonators sustaining metal-insulator-metal (MIM) plasmons and demonstrate the versatility of these cavities to achieve ultrasmall cavity mode volume. Ag/SiO2/Ag MIM structures were made by thin-film deposition and focused ion beam milling with cavity diameters that ranged from d = 65-2000 nm. High-resolution two-dimensional cavity-mode field distri...
متن کاملPhotonic Bandgap Crystal InGaAsP Membrane Microresonstors
We have microfabricated 2-D photonic bandgap structures in a thin slab of dielectric material to define reflectors and high-Q microresonators. By selectively omitting holes from the two-dimensional photonic crystal, laser cavities and optical resonator switches can be defined. We have designed this structure with a finite diffe:rence time domain (FDTD) approach, and demonstrate some promising d...
متن کامل