A Novel Non-Halogenated Flame Retardant for Composite Materials
نویسندگان
چکیده
Flame retardants, such as inorganic fillers or halogenated resins, are incorporated into composites either as additives or reactive materials. In order to improve processability and mechanical properties, as well as reduce smoke toxicity, a method is being developed to introduce highly effective, inexpensive flame retardant materials into thermoset resins. Superabsorbent polymers (SAP) can be loaded with inexpensive inorganic phosphates as the flame retardant component in composite systems. The resulting SAP flame retardants dramatically improved fire resistance when blended with common matrix resins (epoxy, unsaturated polyester, urethane hybrid, and vinyl ester resins) at relatively low levels with very minimal off-gassing of toxic compounds during combustion.
منابع مشابه
مروری بر انواع رزین و الیاف تقویتکننده در عایقهای کامپوزیتی سوخت جامد
Thermal insulation materials protects internal surface of the motor casing in contact with the hot produced gases, extreme turbulence flow and high pressure due to combustion propellant. Insulation Materials in the rocket motor covers the inner surface of the motor casing and protect the body against the damage caused by extreme and short-term heat, intense turbulent flow and high pressure. O...
متن کاملFabrication of Cellulose Nanofiber/AlOOH Aerogel for Flame Retardant and Thermal Insulation
Cellulose nanofiber/AlOOH aerogel for flame retardant and thermal insulation was successfully prepared through a hydrothermal method. Their flame retardant and thermal insulation properties were investigated. The morphology image of the cellulose nanofiber/AlOOH exhibited spherical AlOOH with an average diameter of 0.5 μm that was wrapped by cellulose nanofiber or adhered to them. Cellulose nan...
متن کاملEffects of Complex Flame Retardant on the Thermal Decomposition of Natural Fiber
Natural fiber is a renewable resource characterized by its low cost and environmental friendliness. However, flame retardant properties are one of the biggest limitations for the preparation of composite materials that need to be improved. In this work, a novel complex flame retardant consisting of aluminum hydroxide (ALH) and decabromine diphenyl oxide (PBDE) was proposed to inhibit the therma...
متن کاملNanoparticle networks reduce the flammability of polymer nanocomposites.
Synthetic polymeric materials are rapidly replacing more traditional inorganic materials, such as metals, and natural polymeric materials, such as wood. As these synthetic materials are flammable, they require modifications to decrease their flammability through the addition of flame-retardant compounds. Environmental regulation has restricted the use of some halogenated flame-retardant additiv...
متن کاملPreparation of Flame Retardant Polystyrene via In-Situ Bulk Polymerization Method and Evaluation of its Flammability Properties
In this study, in-situ bulk polymerization was investigated for obtaining flame retardant polystyrene (PS). The halogenated and phosphoric compounds were used as flame retardant additives and Perkadox 30 was used as a synergist. The flammability of the PS was evaluated by thermogravimetric analyzer (TGA), limiting oxygen index (LOI) and UL-94 tests. The results show that polymerization process ...
متن کامل