Effect of Different Loading Conditions

نویسندگان

  • Rick A. Nishimura
  • Liv K. Hatle
چکیده

It has previously been demonstrated that predictable changes occur in mitral flow velocities under different loading conditions. The purpose of this study was to relate changes in pulmonary venous and mitral flow velocities during different loading conditions as assessed by transesophageal echocardiography in the operating room. Nineteen patients had measurements of hemodynamics, that is, mitral and pulmonary vein flow velocities during the control situation, a decrease in preload by administration of nitroglycerin, an increase in preload by administration of fluids, and an increase in afterload by infusion of phenylephrine. There was a direct correlation between the changes in the mitral E velocity and the early peak diastolic velocity in the pulmonary vein curves (r=0.61) as well as a direct correlation between the deceleration time of the mitral and pulmonary venous flow velocities in early diastole (r=0.84). This indicates that diastolic flow velocity in the pulmonary vein is determined by the same factors that influence the mitral flow velocity curves. A decrease in preload caused a significant reduction in the initial E velocity and prolongation of deceleration time, and an increase in preload caused an increase in E velocity and shortening of deceleration time. An increase in afterload produced a variable effect on the initial E velocity and deceleration time and was dependent on the left ventricular filling pressure. The change in systolic forward flow velocity

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of Winkler Foundation on Radially Symmetric Vibrations of Bi-Directional FGM Non-Uniform Mindlin’s Circular Plate Subjected to In-Plane Peripheral Loading

An analysis has been presented of the effect of elastic foundation and uniform in-plane peripheral loading on the natural frequencies and mode shapes of circular plates of varying thickness exhibiting bi-directional functionally graded characteristics, on the basis of first order shear deformation theory. The material properties of the plate are varying following a power-law in both the radial ...

متن کامل

Behavioral Interference of Vibrating Machines Foundations Constructed on Sandy Soils (RESEARCH NOTE)

In this study, dynamic bearing capacity of adjacent shallow strip foundations located on sandy soil was examined using a numerical finite difference modeling, FLAC. The behavioral interference of shallow strip foundations under different conditions was investigated. The effect of soil strength parameters, geometric characteristics of shallow foundations and cyclic loads at different distance ra...

متن کامل

On the effect of grain size on rock behavior under cyclic loading by distinct element method

It is well-known that the mechanical behavior of rocks under cyclic loading is much different from static loading conditions. In most constructions, the load applied to structures is within dynamic ranges. That’s why a great deal of attention has been paid towards this field in order to identify the dynamic behavior of rocks in more details. Nevertheless, the nature of dynamic failure in rocks ...

متن کامل

Investigating the Effects of Temperature and Loading Frequency on the Resilient Modulus of SBS Polymer Modified Asphalt Concrete in Dry and Saturated Conditions

Resilient modulus of pavement materials is a key property required for the pavement thickness design. This paper describes the results of an experimental study on the effects of temperature and loading frequency on the resilient modulus of a SBS polymer modified asphalt concrete under dry and saturated conditions. Dynamic creep tests were conducted on dry and saturated specimens of the mixture ...

متن کامل

Assessment of the Existing Models to Estimate the Fatigue Life under both Multiaxial in Phase and 90° Out of Phase Loading Conditions

Engineers have a range of methods to estimate the fatigue life under multiaxial conditions. Each of these predictive methods is generally subjected to restrictions, related to the inherent simplified assumptions. The objective of this paper is to evaluate the validity of commonly used multiaxial fatigue criteria for different multiaxial loading conditions. The best criterion is identified throu...

متن کامل

Design of an Elastic Arthroplastic Disc Optimized under Different Loads

Introduction: Due to limitations of current treatments for degenerative disc disease, arthroplastic methods to repair the diseased disc have been proposed. The artificial disc is a mobile implant for degenerative disc replacement that attempts to lessen the degeneration of the adjacent elements following interbody fusion procedures. Because the success of artificial disc replacement depends on ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005