14th Int'l Symposium on Quality Electronic Design

نویسندگان

  • Jacob Murray
  • Rajath Hegde
  • Teng Lu
  • Partha Pratim Pande
  • Behrooz Shirazi
چکیده

Wireless Network-on-Chip (WiNoC) has emerged as an enabling technology to design low power and high bandwidth massive multi-core chips. The performance advantages mainly stem from using the wireless links as long-range shortcuts between far apart cores. This performance gain can be enhanced further if the characteristics of the wireline links and the processing cores of the WiNoC are optimized according to the traffic patterns and workloads. In this work, we demonstrate that by incorporating both processorand network-level dynamic voltage and frequency scaling (DVFS) in a WiNoC, the power and thermal profiles can be enhanced without a significant impact on the overall execution time. We also show that depending on the benchmark applications, temperature hotspots can be formed either in the processing core or in the network infrastructure. The proposed duallevel DVFS is capable of addressing both.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

14th Int'l Symposium on Quality Electronic Design

Large on-chip caches account for a considerable fraction of the total energy consumption in modern microprocessors. In this context, emerging Spin-Transfer Torque RAM (STTRAM) has been regarded as a promising candidate to replace large on-chip SRAM caches in virtue of its nature of the zero leakage. However, large energy requirement of STT-RAM on write operations, resulting in a huge amount of ...

متن کامل

14th Int'l Symposium on Quality Electronic Design

This paper proposes a method to reduce the supply voltage IR drop of 3D stacked-die systems by implementing an on-chip Buck Converter on Top die (BCT) scheme. The IR drop is caused by the parasitic resistance of Through Silicon Vias (TSV’s) used in the 3D integration. The IR drop reduction and the overhead associated with the BCT scheme are modeled and analyzed. A 3D stacked-die system is manuf...

متن کامل

14th Int'l Symposium on Quality Electronic Design

Rapid passive device modeling is discussed in this work based on test structures fabricated in a 65 nm CMOS process with M1–M9 copper metal layers and one aluminum metal layer AP. Capacitance extraction for overlapping microstrips and shielded microstrip structures is investigated. Individual capacitances are modeled in terms of area and fringe components, either between microstrips or between ...

متن کامل

10th Int'l Symposium on Quality Electronic Design

Chenyue Ma, Bo Li, Lining Zhang, Jin He, Xing Zhang, Xinnan Lin, and Mansun Chan 1 The Micro& Nano Electronic Device and Integrated Technology Group, The Key Laboratory of Integrated Microsystems, Shenzhen Graduate School of Peking University, Shenzhen, P. R .China; 2 TSRC, Key Laboratory of Microelectronic Devices and Circuits of Ministry of Education, Institute of Microelectronics, EECS, Peki...

متن کامل

13th Int'l Symposium on Quality Electronic Design

Bias temperature instability (among other problems) is a key reliability issue with nanoscale CMOS transistors. Especially in sensitive circuits such as sense amplifiers of SRAM arrays, transistor aging may significantly increase the probability of failure. By analyzing the Current Based Sense Amplifier circuit and Voltage-Latched Sense Amplifier circuit through HSPICE simulations, we observe t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012