Fabrication of transparent-conducting-oxide-coated inverse opals as mesostructured architectures for electrocatalysis applications: a case study with NiO.
نویسندگان
چکیده
Highly ordered, and conductive inverse opal arrays were made with silica and subsequently coated with tin-doped indium oxide (ITO) via atomic layer deposition (ALD). We demonstrate the utility of the resulting mesostructured electrodes by further coating them with nickel oxide via ALD. The NiO-coated arrays are capable of efficiently electrochemically evolving oxygen from water. These modular, crack-free, transparent, high surface area, and conducting structures show promise for many applications including electrocatalysis, photocatalysis, and dye-sensitized solar cells.
منابع مشابه
Optical Characterization of Strong UV Luminescence Emitted from the Excitonic Edge of Nickel Oxide Nanotowers
NiO had been claimed to have the potential for application in transparent conducting oxide, electrochromic device for light control, and nonvolatile memory device. However, the detailed study of excitonic transition and light-emission property of NiO has rarely been explored to date. In this work, we demonstrate strong exciton-complex emission of high-quality NiO nanotowers grown by hot-filamen...
متن کاملDesigning and Fabrication of Electrochromic Windows Using Tungsten Oxide Films Prepared Through Sol-gel Coating on a Glass
In this study, a sol-gel peroxotungstic acid sol was employed to deposit tungsten oxide (WO3) films by the spin-coating technique. In view of smart window applications, electrochromic windows were then designed and fabricated using a thin tungsten oxide film. For this purpose, Glass/ FTO/ WO3/ electrolyte/ FTO/Glass could be of use due to its special structure that consists of an electrochromic...
متن کاملAl2O3/TiO2 inverse opals from electrosprayed self-assembled templates
The fabrication of high optical quality inverse opals is challenging, requiring large size, three-dimensional ordered layers of high dielectric constant ratio. In this article, alumina/TiO2-air inverse opals with a 98.2% reflectivity peak at 798 nm having an area of 2 cm2 and a thickness of 17 µm are achieved using a sacrificial self-assembled structure of large thickness, which was produced wi...
متن کاملComputational study of electronic, spectroscopic, and chemical properties of (CdO)n (n=1-7) nanoclusters as a transparent conducting oxide
An ab initio study has been performed for the electronic, spectroscopic, and chemical properties of the most stable configuration of the (CdO)n nanoclusters by employing B3LYP-DFT/LanL2DZ method. Different isomers were optimized to obtain structural stability and numerous chemical parameters such as dipole moment, ionization potential, etc. We report here the vibrational frequencies of the most...
متن کاملHydrothermal fabrication of three-dimensional secondary battery anodes.
A generalized hydrothermal strategy for fabricating three-dimensional (3D) battery electrodes is presented. The hydrothermal growth deposits electrochemically active nanomaterials uniformly throughout the complex 3D mesostructure of the scaffold. Ni inverse opals coated with SnO2 nanoparticles or Co3O4 nanoplatelets, and SiO2 inverse opals coated with Fe3O4 are fabricated, all of which show att...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- ACS applied materials & interfaces
دوره 6 15 شماره
صفحات -
تاریخ انتشار 2014