Nettle ash as a low cost adsorbent for the removal of nickel and cadmium from wastewater
نویسنده
چکیده
This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorption was found to be 6. The experimental data were tested using Langmuir, Freundlich and Tempkin equations. The data were fitted well to the Langmuir isotherm with monolayer adsorption capacity of 192.3 and 142.8 mg/g for nickel and cadmium, respectively. The adsorption kinetics were best described by the pseudo second order model. The cost of removal is expected to be quite low, as the adsorbent is cheap and easily available in large quantities. The present study showed that nettle ash was capable of removing nickel and cadmium ions from aqueous solution.
منابع مشابه
Cadmium Removal from Aqueous Solutions Using Saxaul Tree Ash
Cadmium can be found in wastewater in high concentrations and can cause dangerous effect on aqueous environment and human health. At present, many methods have been used to heavy metals removal. Among this clean up techniques, adsorption techniques by using low-cost adsorbent are more considerable. In this study, batch adsorption experiments were conducted for removal of cadmium ions from a...
متن کاملInfluence of parameters and kinetic study of nickel (II) and cadmium (III) metals on Dalbergia derived adsorbent
Background and aims: From the past studies, it has been proved that consumption of heavy metals by humans may cause several chronicle problems like cancer, kidney and liver damage, high blood pressure and low blood pressure problems and etc. So, it has become very crucial to remove these heavy metals from industrial wastewater. The aim of this study was to find out a low cost a...
متن کاملSynthesis of Starch-Iron Oxide Nanocomposite by Coprecipitation Method and Its Use for Adsorption of Nickel and Cadmium from Wastewater
Backgrounds & objectives: Contamination of the environment by heavy metals, pollute water and agricultural products. The aggregation of these metals will cause various diseases for human. Therefore, it is important to study how to make them safe. The purpose of this study is to evaluate the efficiency of starch-iron oxide nanocomposite in removing two heavy metals, nickel and cadmium, from wast...
متن کاملImproving Removal of Nickel from Wastewater using Palm Leaf Ash as a Biosorbent
Nickel (Ni) as a heavy metal due to its toxicity should be removed from wastewater and aquatic environments using efficient technology. The aim of this study was to remove Ni from an aqueous solution using palm leaf ash produced in a furnace. To do so, kinetic and thermodynamic experiments were conducted on the adsorption process. Moreover, the effect of time, pH, ads...
متن کاملStudy of Cadmium and Nickel Removal from Battery Industry Wastewater by Fe2O3 Nanoparticles
Nickel and cadmium usually enter the environment and water resources through wastewater, released by various industries, and may have adverse effects. The current study employs α–Fe2O3 nanoparticles of 20-40 nm in order to remove nickel and cadmium from the wastewater of Saba Battery Company. Also, it investigates the influence of effective parameters on adsorption process, including pH, contac...
متن کامل