Airborne fiber concentration and size distribution of mineral fibers in area with serpentinite outcrops in Aichi prefecture, Japan.

نویسندگان

  • K Sakai
  • N Hisanaga
  • N Kohyama
  • E Shibata
  • Y Takeuchi
چکیده

Airborne fiber concentrations and size distributions of both asbestos and nonasbestos fibers were determined at property boundaries of 4 serpentinite quarries producing crushed stone (quarry property boundary), 10 sites within 10 km of the area with serpentinite outcrops (serpentinite area), and 2 sites in a reference area. The asbestos was identified in 7 rock and 3 soil samples collected in the serpentinite area. The geometric means of airborne concentrations of asbestos and nonasbestos fibers longer than 0.2 microm in length were: 384 and 447 fibers/liter (f/L) in the quarry property boundary (in operation), 12 and 124 f/L in the quarry property boundary (in closed), 5 and 103 fibers/liter in the serpentinite area, and less than 2 and 59 fibers/liter in the reference area, respectively. There was a significant difference in airborne concentrations of both asbestos and nonasbestos fibers among the areas. Ttremolite/actinolite were found with chrysotile in the stones. Airborne concentrations of tremolite/actinolite were higher than those of chrysotile at the quarry property boundary and in the serpentinite area. Tremolite/actinolite were also found in the soils. There was no significant difference among the areas in the arithmetic means of fiber size distribution of both asbestos and nonasbestos fibers.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Assessment of Airborne Asbestos Fibers Concentration in Yazd City in Summer 2015

Introduction: Today, have been approved scientifically relationship between presence of asbestos fibers in the human respiratory area and malignant diseases such as lung advanced fibrosis (Asbestosis), gastrointestinal, lung and Laryngeal cancers. The aim of this study was the determination of asbestos fibers concentration in Yazd city’s air in the summer of 2015. Materials and Methods: ...

متن کامل

Dose distributions of high-precision radiotherapy treatment: A comparison between the CyberKnife and TrueBeam systems

Background: Several high-precision stereotactic radiation therapy modalities are currently used in clinical settings. We aimed to evaluate whether the CyberKnife (CK) or TrueBeam (TB) radiation treatment systems were more appropriate for treating targets of various morphologies according to the physical properties of each device.  Materials and Methods: Spheres (diameter = 5–50 mm), as well as ...

متن کامل

The Effect of Matrix Bond Failure on Stress Distribution in Short and Long Fibers of a Hybrid Composite Lamina

Abstract : The effect of a bond failure and its extent is studied on stress concentration in long fibers as well as stress distribution in short fibers and their surrounding matrix bays. The material is assumed to be a finite width hybrid composite lamina which is subjected to a tensile load of magnitude "P" at infinity. The surrounding matrix is assumed to take only shear (shear-lag theory). T...

متن کامل

Morphology control of clay-mineral particles as supports for metallocene catalysts in propylene polymerization

Spray dry granulation of clay minerals was studied to obtain clay mineral base support material for metallocene supported olefin polymerization catalysts. The morphology of the granules was strongly influenced by the nature of the clay mineral itself. Because of swelling characteristics of montmorillonite, its water dispersion was highly viscous even in the low slurry concentration (< 4 wt %). ...

متن کامل

The Elastic Modulus of Steel Fiber Reinforced Concrete (SFRC) with Random Distribution of Aggregate and Fiber

The present paper offers a meso-scale numerical model to investigate the effects of random distribution of aggregate particles and steel fibers on the elastic modulus of Steel Fiber Reinforced Concrete (SFRC). Meso-scale model distinctively models coarse aggregate, cementitious mortar, and Interfacial Transition Zone (ITZ) between aggregate, mortar, and steel fibers with their respective materi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Industrial health

دوره 39 2  شماره 

صفحات  -

تاریخ انتشار 2001