Matching Diffuser Vane with Return Vane Installed in Multistage Centrifugal Pump
نویسندگان
چکیده
The effects of the diffuser vane on the performances of the multistage centrifugal pump were investigated experimentally, taking account of the interactions among the diffuser vane, the return vane, and the next stage impeller. It is very important to match well the diffuser vane with the return vane, for improving the hydraulic efficiency of the pump. The efficiency may be more improved by making the cross-sectional area of the channel from the diffuser vane outlet to the return vane inlet larger, as much as possible.
منابع مشابه
Experimental Study on Centrifugal Pump to Determine the Effect of Radial Clearance on Pressure Pulsations, Vibrations and Noise
This article represents experimental study work carried out on a single stage diffuser type centrifugal pump. The flow-induced pressure pulsations, mechanical vibrations and noise has been monitored during the experimentations for five different flow rates by varying the radial clearance. For each case of radial clearance and flow conditions, overall levels and frequency spectra, in a wide freq...
متن کاملSimulation-based Vibration Sensor Placement for Centrifugal Pump Impeller Fault Detection
In this paper, a simulation-based method is proposed for optimal placement of vibration sensors for the purpose of fault detection in a centrifugal pump. The centrifugal pump is modeled to investigate the effect of vane tip fault on fluid flow patterns numerically. Pressure pulsations are investigated at different locations at the inner surface of the pump before and after the presence of the f...
متن کاملEffect of Double Row Diffusers on Performance and Flow Field of a Centrifugal Compressor
The present paper reports measurements carried out in a centrifugal compressor equipped with double row of low solidity partial vane diffuser. Performance of the compressor is measured with three sets of double row diffusers with different radial spacing between the diffusers. From these measurements best configurations are identified and static pressures on the diffuser walls and probe measure...
متن کاملPerformance Analysis of a Variable Geometry Turbocharger Using Mean Line Method
Turbocharging an engine boosts its power by increasing the amount of input air. This task is accomplished by using the exhaust gas to power a turbine which is engaged with a compressor. The Variable Geometry Turbocharger, VGT is a unique turbocharger that the diffuser vane angle can be changed over a wide range of positions. The mathematics of turbomachinery flow analysis is intensive and uses ...
متن کاملThe Performance of a 6.5 Pressure Ratio Centrifugal Compressor having a Radially-Vaned Impeller
SUMMARY The aerodynamic design and experimental performance of a centrifugal compressor designed for a pressure ratio of 6.5 and a specific speed of 68 are described, The compressor consisted of a radially-vaned impeller and a transonic, vaned radial diffuser. At design speed a peak overall total-to-total isentropic efficiency of 0.746 was achieved at the maximum pressure ratio of 5.9, rising t...
متن کامل