Isolated Pico-Hydropower Generation for Power Quality Improvement Using 24 Pulse Ac-Dc Converter
نویسندگان
چکیده
A comparative study between the topologies consisting of the Conventional Electronic Load Controller and the Proposed Electronic Load controller (ELC)has been carried out in this paper for the power Quality Improvement in a conventional Electronic Load controller used for Isolated pico-hydropower generation using Asynchronous generator (AG). A polygon wound autotransformer with reduced Kilo Volts ampere rating is employed in the proposed ELC for reducing the harmonic current reduction in order to meet the power quality requirements as prescribed by IEEE standard. The conventional ELC employs six-pulse-bridge-rectifier and the Proposed ELC employs twenty four -pulse-bridge-rectifier. The simulation of conventional Electronic Load Controller (ELC) and proposed load controller is carried out in MATLAB/SIMULINK with simpower systems tool box.
منابع مشابه
Operation of Stand Alone PV Generating System for Supplying Unbalanced AC Loads
This paper describes a DC isolated network which is fed with Distributed Generation (DG) from photovoltaic (PV) renewable sources for supplying unbalanced AC loads. The battery energy storage bank has been connected to the DC network via DC/DC converter to control the voltage of the network and optimize the operation of the PV generation units. The PV arrays are connected to the DC network ...
متن کاملمبدل AC-DC24 پالسه مبتنی بر اتوترانسفورماتورچنگالی به منظور بهبود شاخصهای کیفیت توان
In this paper, a 24-pulse ac-dc converter is designed, modeled and simulated based on a fork autotransformer to improve power quality indices. The use of autotransformer results in reduced kVA rating of the proposed topology as compared with the transformer based 24-pulse converter. Due to the proper flexibility of the proposed topology, it can be simply utilized in other similar applications. ...
متن کاملMulti-Stage DC-AC Converter Based on new DC-DC converter for energy conversion
This paper proposes a multi-stage power generation system suitable for renewable energy sources, which is composed of a DC-DC power converter and a three-phase inverter. The DC-DC power converter is a boost converter to convert the output voltage of the DC source into two voltage sources. The DC-DC converter has two switches operates like a continuous conduction mode. The input current of DC-DC...
متن کاملPower Quality Improvement Using Grid Side Converter of Wind Energy Conversion System
This paper presents the control of a WECS (wind energy conversion system), equipped with a DFIG (doubly fed induction generator), for maximum power generation and power quality improvement simultaneously. The proposed control algorithm is applied to a DFIG whose stator is directly connected to the grid and the rotor is connected to the grid through a back-to-back AC-DC-AC PWM (pulse width modul...
متن کاملApplication of Pulse Doubling in Star-Connected Autotransformer Based 12-Pulse AC-DC Converter for Power Quality Improvement
This paper presents a pulse doubling technique in a 12-pulse ac-dc converter which supplies direct torque controlled motor drives (DTCIMD’s) in order to have better power quality conditions at the point of common coupling. The proposed technique increases the number of rectification pulses without significant changes in the installations and yields in harmonic reduction in both ac and dc sides....
متن کامل