Design and Analysis of Temperature Sensor Array by Using Comsol Multiphysics 4.3
نویسندگان
چکیده
This paper propose a new design and analysis of MEMS sensor array based on thermal stress and electric current properties. The COMSOL Multiphysics 4.3 software is used to design the sensor array of the sensing layer. The material selection is done based on the thermal analysis of the sensor array. The polysilicon yield a maximum displacement of 0.00143μm and also it is suitable for human skin. So polysilicon can be proposed for sensor array and then analysis the performance of sensor array.
منابع مشابه
Design and Simulation of a Fluidic Micro-Bio-Sensor Based on Resonator Array
In this paper, a fluidic biosensor with possibility to fabricate by Micro-Electro-Mechanical Systems (MEMS) technology is proposed for biomedical mass detection and lab-on-chip applications. This is designed by electromechanical coupling of harmonic micromechanical resonators with harmonic springers as a mechanical resonator array. It can disperse mechanical wave along the array by electrostati...
متن کاملDesign of FIDT for 3D Analysis of MEMS Based Gas Sensor Using SAW Technology
As energy can neither be created nor be destroyed but can be transformed from one form to other form, depending on application. In some cases energy released/ absorbed in any reaction sometimes will alter the process parameters and cause disturbance in normal flow of operation. This effect has its impact even in fundamental wave propagation properties and results in introduction of unwanted noi...
متن کاملTiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملDesign & Electro-Thermal Analysis of Microheater for Low Temperature MEMS based Gas Sensor
The advent of nanocrystalline metal oxide semiconductor permits microheater to be incorporated into integrated gas sensors to heat the sensing layer to a low temperature. The low temperature sensing allows the use of a relatively thin silicon membrane instead of zero Silicon membrane resulting into temperature uniformity across the entire active area (2mmx2mm) which in turn reduces the reliabil...
متن کاملAnalysis of Mass Based Micro Cantilever Using Comsol
--MEMS based mass sensors are being designed to identify the small amounts of materials especially for monitoring the food supply. The Fabrication of MEMS includes deposition of material layers, pattering by photolithography and etching to produce the required shapes, consequently leading to time taking and expensive method. In order to reduce the working time of sensor to market a Finite eleme...
متن کامل