The dynforce archwire.
نویسندگان
چکیده
This article is a presentation of a clinical methodology aimed at minimizing binding in fixed orthodontic appliances. The dynforce archwire is explained. The dynforce archwire has a full size anterior segment (e.g. .021×.025) and undersized posterior segments with rectangular cross-section (e.g. .018×.025 or .018×.022), and is used in the orthodontic phase of space closure with or without TAD miniscrews. Two clinical cases are presented.
منابع مشابه
Galvanic Corrosion among Different Combination of Orthodontic Archwires and Stainless Steel Brackets
Introduction: The aim of this study was to assess the galvanic behavior of different bracket and archwire combinations that are commonly used in orthodontic treatments. Methods: Three types of orthodontic archwires with a diameter of 0.016×0.022 inch and 80 standard edgewise maxillary central incisor brackets were selected. Three groups consisted of different wire-bracket couples and one group ...
متن کاملEvaluation of rotational control and forces generated during first-order archwire deflections: a comparison of self-ligating and conventional brackets.
The purpose of this study was to compare the activation and deactivation forces generated during first-order archwire deflections when different sizes and types of NiTi wires are paired with conventional and self-ligating brackets (SLBs) and to evaluate the rotational control between these same archwire and bracket combinations. Four maxillary premolar SLBs (Damon 3MX, SmartClip, Carriere, and ...
متن کاملSimulation and Analysis of Orthodontic Archwire Bending Robot
A 3D mathematical model of orthodontic archwire with rectangular curve is established. Simplified 3D solid model of orthodontic archwire bending robot, which is consistent of bending die, support structure and archwire are established by Creo software, then the simplified model of bending die is put into ANSYS Workbench. Material parameters the contact condition and boundary conditions are set ...
متن کاملA new esthetic fiber-reinforced polymer composite resin archwire: a comparative atomic force microscope (AFM) and field-emission scanning electron microscope (FESEM) study
BACKGROUND Fiber-reinforced polymer composite (FRPC) archwires could provide an esthetic solution to conventional orthodontic archwires. This study was carried out with the following aims: (1) to compare the sliding friction of FRPC archwire with nickel titanium archwire using various archwire-bracket combinations and (2) to determine the correlation between surface roughness and friction of th...
متن کاملInfluence of archwire and bracket dimensions on sliding mechanics: derivations and determinations of the critical contact angles for binding.
There is every indication that classical friction controls sliding mechanics below some critical contact angle, theta c. Once that angle is exceeded, however, binding and notching phenomena increasingly restrict sliding mechanics. Using geometric archwire and bracket parameters, the theta c is calculated as the boundary between classical frictional behaviour and binding-related phenomena. What ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Annali di stomatologia
دوره 4 2 شماره
صفحات -
تاریخ انتشار 2013