Internal short circuit mitigation of high-voltage lithium-ion batteries with functional current collectors
نویسندگان
چکیده
The safety of lithium-ion battery (LIB) becomes increasingly critical as the specific energy and cell capacity rapidly increase. Based on the modified current collector technique recently developed for nickel–cobalt– manganese active materials, here we investigate high-energy LIBs based on functional current collectors (FCC). Two high-voltage active materials were tested in our experiments: lithium-rich layered oxide (LRLO) and lithium nickel manganese oxide (LNMO). At the same time as a fully charged LIB cell is damaged, FCC isolates the internal short circuit (ISC) from the undamaged area; hence, the ISC-induced heat generation is drastically reduced to a negligible level. The electrochemical performance of FCCbased cells is nearly identical to that of reference cells.
منابع مشابه
Voltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملHeterogeneous current collector in lithium-ion battery for thermal-runaway mitigation
Current collector accounts for more than 90% of the electric conductivity and 90% of the mechanical strength of the electrode in lithium-ion battery (LIB). Usually, current collectors are smooth metallic thin films. In the current study, we show that if the current collector is heterogeneous, the heat generation becomes negligible when the LIB cell is subjected to mechanical abuse. The phenomen...
متن کاملInternal Resistance based State of Charge Estimation for Lead acid and Lithium ion Batteries - A Simulink Approach
Estimating the state of charge is important for any battery operated device. In case of automobile batteries, which are designed to deliver large power, many methods such as open circuit voltage based, ampere hour counting based, impedance based are used for calculating the state of charge. Internal resistance of a battery at a particular temperature directly gives the information about the sta...
متن کاملMechanism of the entire overdischarge process and overdischarge-induced internal short circuit in lithium-ion batteries
Lithium-ion batteries connected in series are prone to be overdischarged. Overdischarge results in various side effects, such as capacity degradation and internal short circuit (ISCr). However, most of previous research on the overdischarge of a cell was terminated when the cell voltage dropped to 0 V, leaving the further impacts of overdischarge unclear. This paper investigates the entire over...
متن کاملNumerical investigation of the parameters of a prismatic lithium ion battery under load for electrical vehicle
Electric vehicles and hybrid electric vehicles are a suitable alternative for vehicles with hydrocarbons fuels to reduce pollution and fossil resources. The batteries operate as the driving force for these vehicles. One of the most critical parameters of the battery is computing the state of charge (SOC). The best range for SOC of lithium-ion battery is between 20% and 90%, and charging and dis...
متن کامل