Acousto-optics Devices for High-power Laser Beam

نویسندگان

  • D. Yu. Velikovskiy
  • V. E. Pozhar
  • M. M. Mazur
چکیده

We present a study of the actuality of acousto-optics devices capable to withstand high-power laser emission. Some applications and specifics were considered, and the first assessment of parameters of the devices on KGd(WO4)2 single crystal was made. New acousto-optics modulator on that crystalline material for non-polarized high-power light radiation was developed, tested and shown almost 100% of diffraction efficiency.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Variable optical attenuator using double acousto-optic modulator

A novel variable optical attenuator device is proposed and some of the potential application is pointed out. It relies on a double acousto optic modulator set up and allows one to attain dynamic range as high as 60 dB. Such feature steams out of the well known modeling of acousto optic devices, mostly based on the coupled wave analysis. Furthermore, is shown that the proposed device may exhibit...

متن کامل

Diode-pumped 1 kW Q-switched Nd:YAG rod laser with high peak power and high beam quality.

We have demonstrated high-peak-power generation at 1 kW average power by applying an acousto-optic Q switch to a quasi-cw diode-pumped Nd:YAG master oscillator power amplifier. We achieved a maximum peak power of 2.3 MW by driving the Q switch in burst mode. The average repetition rate was 6 kHz. The corresponding beam quality was M2 = 9.

متن کامل

Different Plastic Materials Based Acousto-optic Modulators (AOMs) Design Considerations for Fast Switching Applications

An acousto-optic modulator (AOM) allows to diffract a laser beam going through a crystal from the incidence angle (order 0) to another angle (order 1). The diffracted beam intensity depends on the radio frequency (RF) power applied to the device while the output angle depends on the material but is also proportional to the laser wavelength and to the RF drive frequency. When only intensity modu...

متن کامل

Acousto-Optic Tunable Filters Spectrally Modulate Light

The development of opt electronic technology in the past two decades has intensified research on devices that control and manipulate optical radiation. Acousto-optic devices are based on acousto-optic effects in which the optical medium is altered by the presence of ultrasound. Examples of acousto-optic devices include optical modulators, deflectors, scanners, Q-switches, isolators, and frequen...

متن کامل

Using of Broadened Asymmetric Waveguide Structure for 980nm Diode Laser

Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012