Actuator Fault-Tolerant Control based on Set Separation

In this report an actuator fault-tolerant control (FTC) strategy based on set separation is presented. The proposed scheme employs a bank of observers which match the different fault situations that can occur in the plant. Each of these observers has an associated estimation error with a distinctive behaviour when a estimator matches the current fault situation of the plant. With this information from each observer, a fault diagnosis and isolation (FDI) module is able to reconfigure the control loop by selecting the appropriate stabilising controller from a bank of precomputed control laws, each of them related to one of the considered fault models. The control law consists of a reference feedforward term and a feedback gain multiplying the state estimate provided by the matching observer. The decision criteria of the FDI is based on the computation of sets towards which the output estimation errors related to each fault scenario and for each control configuration converge. Conditions for the design of the FDI module and for fault tolerant closed-loop stability are given, and the effectiveness of the approach is illustrated by means of a numerical example. ∗ Maria Seron and Jose de Doná are with the ARC Centre for Complex Dynamic Systems and Control (CDSC), University of Newcastle, Callaghan, NSW, 2308, Australia. e-mail: {Maria.Seron, Jose.Dedona}@newcastle.edu.au. Institut de Robòtica i Informàtica Industrial (IRI) Consejo Superior de Investigaciones Cient́ıficas (CSIC) Universitat Politècnica de Catalunya (UPC) Llorens i Artigas 4-6, 08028, Barcelona Spain Tel (fax): +34 93 401 5750 (5751) http://www-iri.upc.es Corresponding author: C. Ocampo-Martinez tel: +34 93 401 5786 [email protected] http://www-iri.upc.es/people/cocampo c © Copyright IRI, 2009 Section