Lidar-equipped Uav for Building Information Modelling
نویسندگان
چکیده
The trend to minimize electronic devices in the last decades accounts for Unmanned Airborne Vehicles (UAVs) as well as for sensor technologies and imaging devices, resulting in a strong revolution in the surveying and mapping industries. However, only within the last few years the LIDAR sensor technology has achieved sufficiently reduction in terms of size and weight to be considered for UAV platforms. This paper presents an innovative solution to capture point cloud data from a Lidar-equipped UAV and further perform the 3D modelling of the whole envelope of buildings in BIM format. A mini-UAV platform is used (weigh less than 5 kg and up to 1.5 kg of sensor payload), and data from two different acquisition methodologies is processed and compared with the aim at finding the optimal configuration for the generation of 3D models of buildings for energy studies
منابع مشابه
Design of a Novel Auto-rotating Uav Platform for Underground Mine Cavity Surveying
The purpose of this paper is to investigate the potential for use of UAVs in underground mines and present a prototype design for a novel autorotating UAV platform for underground 3D data collection. The mining industry has recently shown increased interest in the use of unmanned aerial vehicles (UAVs) to assist in everyday operations [20, 11, 4]. Above ground, small UAVs are in some cases a mo...
متن کاملA Graph Based Registration Method for UAV LiDAR Data and Sequent Images
Earth observation sensors are moving toward to the way of miniaturization, flexibility, and integration. Simultaneously, the Unmanned Aerial Vehicles (UAV) is becoming a flexible, cheap, and popular platform, which is widely used for emergency response, hazard mapping, and island mapping. However, the limited pay load of the UAV often lead to trade-off between weight and accuracy which will ari...
متن کاملBuilding 3D City Models: Testing and Comparing Laser Scanning and Low-Cost UAV Data Using FOSS Technologies
Presently, the use of new technologies for the acquisition of 3D geographical data on time is very important for urban planning. Applications include evaluation and monitoring of urban parameters (ie. volumetric data),indicators of an urban plan, or monitoring built-up areas and illegal buildings. This type of 3D data can be acquired through an Airborne Laser Scanning system, also known as LiDA...
متن کاملHigh-Throughput Phenotyping of Plant Height: Comparing Unmanned Aerial Vehicles and Ground LiDAR Estimates
The capacity of LiDAR and Unmanned Aerial Vehicles (UAVs) to provide plant height estimates as a high-throughput plant phenotyping trait was explored. An experiment over wheat genotypes conducted under well watered and water stress modalities was conducted. Frequent LiDAR measurements were performed along the growth cycle using a phénomobile unmanned ground vehicle. UAV equipped with a high res...
متن کامل[Article] HISTORICAL BUILDINGS MODELS AND THEIR HANDLING VIA 3D SURVEY: FROM POINTS CLOUDS TO USER-ORIENTED HBIM
This paper retraces some research activities and application of 3D survey techniques and Building Information Modelling (BIM) in the environment of Cultural Heritage. It describes the diffusion of as-built BIM approach in the last years in Heritage Assets management, the socalled Built Heritage Information Modelling/Management (BHIMM or HBIM), that is nowadays an important and sustainable persp...
متن کامل