Preparation of ZnS nanoparticles by ultrasonic radiation method
نویسندگان
چکیده
Zn nanoparticles were prepared by the inert-gas evaporation technique with induction heating method. Asprepared Zn particles were mixed with Na2S solution. ZnS nanoparticles were synthesized under ultrasonic radiation. They were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV spectrophotometry, and X-ray photoelectron spectrometry (XPS). XRD revealed that the ZnS nanoparticles prepared have a zincblende structure. TEM observations showed that the ZnS nanoparticles are in a spherical form with an average diameter of 40 nm. XPS results proved that, for our sample, the binding energies of Zn 2p and S 2p are the same as those of bulk single-crystal, but the full widths at half maximum of the XPS peaks are larger than those of bulk single-crystal.
منابع مشابه
Ultrasonic-assisted Method for Preparation of Cu-doped ZnS Nanoparticles in Water as a Highly Efficient Visible Light Photocatalyst
Ultrasonic-assisted method was applied for preparation of Cu+2-doped ZnS nanoparticles (mole fractions of Cu+2 ions are 0.000, 0.015, 0.030 and 0.060) in water as a template-free and green method at 30 min. The prepared nanoparticles were investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and UV–Vis diffuse reflectance spectra (DRS)...
متن کاملDevelopment of a Mild Hydrothermal Method toward Preparation of ZnS Spherical Nanoparticles
متن کامل
Preparation of ZnO and ZnS nanoparticles and in-vitro study of their antimicrobial effect
Zinc sulfide (ZnS) & zinc oxide (ZnO) nanoparticles was evaluated for their antimicrobial activity against four pathogenic strains. ZnS&ZnO nanoparticles were synthesized by simple aqueous chemical reaction in an aqueous solution. The main advantage of these nanoparticles (size of 10-30 nm) was that simply could be prepared by using cheap precursors in a cost effective and high throughput manne...
متن کاملCAVITATION DEPOSITION OF ZnS NANOPARTICLES INTO COMPOSITE WITH MONTMORILLONITE PARTICLES
In this paper we report on ZnS nanoparticles produced by precipitation of zinc acetate and sodium sulphide and stabilized by cetyltrimethylammonium bromide (CTAB) in aqueous media and deposited on montmorillonite (MMT). For the deposition a new method based on intensive cavitation was used. The montmorillonite carrier was first disintegrated by intense turbulent mixing in an ultrasonic field in...
متن کاملPreparation of Chitosan-Copper Nanoparticles Coated Kraft Paper, Characterization and its Antimicrobial Activity
In this paper, Chitosan-copper nanoparticles were successfully coated onto the Kraft paperusing a dip coating process. First, chitosan-copper nanoparticles solution was prepared byreduction method and the use of ultrasonic radiation. It was employed copper sulphate pentahydrateas precursor salt, NaOH as a reducing agent and Chitosan as capping agent to prepareChitosan-copper nanoparticles solut...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 1998