Element composition and mineralogical characterisation of air pollution control residue from UK energy-from-waste facilities.

نویسندگان

  • Anna Bogush
  • Julia A Stegemann
  • Ian Wood
  • Amitava Roy
چکیده

Air pollution control (APC) residues from energy-from-waste (EfW) are alkaline (corrosive) and contain high concentrations of metals, such as zinc and lead, and soluble salts, such as chlorides and sulphates. The EPA 3050B-extractable concentrations of 66 elements, including critical elements of strategic importance for advanced electronics and energy technologies, were determined in eight APC residues from six UK EfW facilities. The concentrations of Ag (6-15 mg/kg) and In (1-13 mg/kg), as well as potential pollutants, especially Zn (0.26-0.73 wt.%), Pb (0.05-0.2 wt.%), As, Cd, Cu, Mo, Sb, Sn and Se were found to be enriched in all APC residues compared to average crustal abundances. Results from a combination of scanning electron microscopy with energy dispersive X-ray spectroscopy and also powder X-ray diffraction, thermal analysis and Fourier transform infrared spectroscopy give an exceptionally full understanding of the mineralogy of these residues, which is discussed in the context of other results in the literature. The present work has shown that the bulk of the crystalline phases present in the investigated APC residues include Ca-based phases, such as CaCl(x)OH(2-x), CaCO3, Ca(OH)2, CaSO4, and CaO, as well as soluble salts, such as NaCl and KCl. Poorly-crystalline aragonite was identified by FTIR. Sulphur appears to have complex redox speciation, presenting as both anhydrite and hannebachite in some UK EfW APC residues. Hazardous elements (Zn and Pb) were widely associated with soluble Ca- and Cl-bearing phases (e.g. CaCl(x)OH(2-x) and sylvite), as well as unburnt organic matter and aluminosilicates. Specific metal-bearing minerals were also detected in some samples: e.g., Pb present as cerussite; Zn in gahnite, zincowoodwardite and copper nickel zinc oxide; Cu in tenorite, copper nickel zinc oxide and fedotovite. Aluminium foil pieces were present and abundantly covered by fine phases, particularly in any cracks, probably in the form of Friedel's salt.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Plasma treatment of air pollution control residues.

Air pollution control (APC) residues from waste incineration have been blended with silica and alumina and the mix melted using DC plasma arc technology. The chemical composition of the fully amorphous homogeneous glass formed has been determined. Waste acceptance criteria compliance leach testing demonstrates that the APC residue derived glass releases only trace levels of heavy metals (Pb (<0...

متن کامل

Medical waste management in Korea.

The management of medical waste is of great importance due to its potential environmental hazards and public health risks. In the past medical waste was often mixed with municipal solid waste and disposed of in residential waste landfills or improper treatment facilities (e.g. inadequately controlled incinerators) in Korea. In recent years, many efforts have been made by environmental regulator...

متن کامل

Solidification/stabilisation of air pollution control residues using Portland cement: Physical properties and chloride leaching.

Portland cement (CEMI) was used to solidify air pollution control (APC) residues from an energy-from-waste plant burning municipal solid waste. APC residue/CEMI mixes were prepared with CEMI additions ranging from 0 to 50 weight% (wt%) of total dry mass and water/solids ratios between 0.40 and 0.80. Isothermal conduction calorimetry was used to assess the effect of APC residues on the hydration...

متن کامل

Waste-to-Energy in Europe and Technology Highlights from Von Roilinova Projects

Von Roll Inova is a major provider of thermal treatment technologies ranging from combustion, energy recovery, air pollution control, and residue processing. The company is headquartered in Switzerland and its portfolio includes over 300 WTEs around the world, processing more than 100,000 metric tons of solid wastes per day. This paper discusses the technological and political trends in Europe ...

متن کامل

Environmental and Economic Evaluation of Municipal Solid Waste Management using WAGS Model – Air Pollutant Emission and Fuel Economy in Waste Collection Sector

Solid waste collection, transfer and transportation (SWCTT) is a fundamental component of solid waste management systems that contributes to both the costs and environmental emissions associated with managing solid waste. The objective of this study is to project the fuel consumption and fuel costs of SWCTT in Tehran from 2018 to 2032. A further objective is to evaluate the air pollutant emissi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Waste management

دوره 36  شماره 

صفحات  -

تاریخ انتشار 2015