Development of adsorptive membranes by confinement of activated biochar into electrospun nanofibers
نویسندگان
چکیده
Adsorptive membranes have many applications in removal of contaminants, such as heavy metals and organic contaminants from water. Recently, increasing concentrations of pharmaceutically active compounds, especially antibiotics, such as chlortetracycline in water and wastewater sources has raised concerns about their potentially adverse impacts on environment and human health. In this study, a series of polyacrylonitrile (PAN)/activated biochar nanofibrous membranes (NFMs) with different loadings of biochar (0-2%, w/w) were fabricated using electrospinning. The morphology and structure of fabricated membranes was investigated by scanning electron microscopy, Fourier transform infrared and thermogravimetric analysis. The results showed that at 1.5% of biochar loading, the surface area reached the maximum value of 12.4 m2/g and beyond this loading value, agglomeration of particles inhibited fine interaction with nanofibrous matrix. Also, the adsorption tests using chlortetracycline showed that, under environmentally relevant concentrations, the fabricated adsorptive NFMs had a potential for removal of these types of emerging contaminants from water and wastewaters.
منابع مشابه
Electrospun Membranes for Desalination and Water/Wastewater Treatment: A Comprehensive Review
Polymeric nanofbers, specifcally fabricated by electrospinning, offer viable means useful for a wide range of applications such as health, energy and environmental issues. However, among the mentioned sectors, desalination and water/wastewater treatment applications have been highlighted during the past decade. This article focuses on the present status and recent develo...
متن کاملElectrospun membranes: Next generation membranes for desalination and water/wastewater treatment
متن کامل
A Review of Electrospun Nanofber Membranes
Electrospun nanofber membranes (ENMs) are new generation of membranes with many favorable properties such as high flux and low pressure drop. Although electrospinning has been known for more than a century, its applications in fltration and separation processes are relatively new. Electrospinning has provided the means to produce ultrathin fbers – as thin as a few nanome...
متن کاملGenipin cross-linked electrospun chitosan-based nanofibrous mat as tissue engineering scaffold
Objective(s): To improve water stability of electrospun chitosan/ Polyethylene oxide (PEO) nanofibers, genipin, a biocompatible and nontoxic agent, was used to crosslink chitosan based nanofibers. Materials and Methods: Different amounts of genipin were added to the chitosan/PEO solutions, chitosan/PEO weight ratio 90/10 in 80 % acetic acid, and the solutions were then electrospun to form nano...
متن کاملThe Advances of Electrospun Nanofibers in Membrane Technology
Electrospinning is a simple and versatile technique that relies on the electrostatic repulsion between surface charges to continuously draw nanofibers from a viscoelastic fluid. Electrospinning can generate nanofibers with a number of secondary structures. Surface and/or interior of nanofibers can be functionalized with molecular species or nanoparticles during or after an electrospinning proce...
متن کامل