Antenna design and channel modeling in the BAN context - part II: channel
نویسندگان
چکیده
1 ENSTA Paris-Tech, 32, Bd. Victor, 75739 Paris cedex 15 – France Tél. : 01 45 52 60 81 Fax : 01 45 52 83 27 [email protected] www.ensta.fr 2 ESYCOM, Université Paris-Est Marne-La-Vallée, 5 Bd Descartes, Champs-surMarne 77454 Marne La Vallée – France Tél. : 01 60 95 72 62 Fax : 01 60 95 72 14 [email protected] [email protected] www.esycom.univ-mlv.fr 3 CEA-Leti, 17, Avenue des Martyrs, 38054 Grenoble cedex 9 – France Tél. : 04 38 78 56 47 Fax : 04 38 78 65 86 [email protected] www-leti.cea.fr 4 Orange Lab., 38-48, rue du Général Leclerc, 92794 Issy les Moulineaux– France Tél. : 01 45 29 57 73 Fax : [email protected] [email protected]
منابع مشابه
بررسی تأثیر فاصله‌ی بین آنتن‌ها در فرستنده و گیرنده بر روی ظرفیت کانال MIMO
In this paper, the spatial MIMO channel modeling (SCM) is introduced and the required parameters for this modeling are studied. Then, the MIMO channel gains and capacity are analyzed. The transmitter and receiver antenna patterns are also analyzed. Next, we are focused on the effects of the transmitter and receiver antenna arrays separations, the arrays length, and the angles spread on the ante...
متن کاملRadio Channel Modeling in Body Area Networks
A body area network (BAN) is a network of bodyworn or implanted electronic devices, including wireless sensors which can monitor body parameters or to detect movements. One of the big challenges in BANs is the propagation channel modeling. Channel models can be used to understand wave propagation in and around the human body and they are essential for antenna design, protocol design and the des...
متن کاملمدلسازی دو بعدی کانال‌های چند ورودی– چند خروجی با آرایه‌های قطبی‌شده
In this paper, required parameters for the spatial MIMO channel modeling are studied, and necessary steps for realization of the channel based on two different scenarios, called; “ un-polarized and cross-polarized antenna”, are introduced. We also consider the effect of cross correlations between important parameters like delay spread, shadow fading and angle spread in our study. Th...
متن کاملSimulation of Subcooled Flow Boiling Occurring in Internal Combustion Engine Water Jacket by Numerical Modeling in a Channel with Hot Spot
Boiling heat transfer always has been proposed as a solution for enhancing heat transfer between the fluid and solid surfaces. Subcooled flow boiling is one of the mechanisms that occur in Internal Combustion Engine water jacket in which high amounts of heat is transferred. In this research, it has been tried to simulate subcooled flow boiling in a geometry similar to coolant channel inside the...
متن کاملNumerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells
Flow channel design on bipolar plates has a direct effect on Proton Exchange Membrane (PEM) fuel cell performance. It has been found out that the flow field design has a deterministic role on the mass transport and water management, and therefore on the achieved power in PEM Fuel cells. This study concentrates on improvements in the fuel cell performance through optimization of channel dimensio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Annales des Télécommunications
دوره 66 شماره
صفحات -
تاریخ انتشار 2011