Scan-matching Based 6DOF SLAM Using Omnidirectional Stereo

نویسندگان

  • Hiroshi Koyasu
  • Hitoshi Maekawa
  • Hiroshi Kawasaki
  • Shintaro Ono
  • Katsushi Ikeuchi
چکیده

Simultaneous localization and mapping (SLAM) of working environments is one of the important problems in mobile robotics. For the problem, we present a new method using an omnidirectional stereo system. By using 3D range information obtained from the omnidirectional stereo, we construct scan-matching based extended Kalman filter SLAM(EKF-SLAM) system. In the system, the output of the piecewise iterative closest point(ICP) algorithm is used as the observation of the EKF. The global consistency of the robot trajectory is kept by a loop closing method based on the Kalman smoothing. Experimental results of the method are shown for a simulated environment.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Performance Analysis of Omnidirectional Vision Based Simultaneous Localization and Mapping

This paper presents a performance analysis of omnidirectional vision based Simultaneous Localization and Mapping (SLAM). In omnidirectional vision based SLAM; robots perform vision based SLAM using only monocular omnidirectional cameras. In this paper, we mainly investigate the use of an omnidirectional camera for Extended Kalman Filter (EKF) based SLAM. To evaluate the success of omnidirection...

متن کامل

IMLS-SLAM: scan-to-model matching based on 3D data

The Simultaneous Localization And Mapping (SLAM) problem has been well studied in the robotics community, especially using mono, stereo cameras or depth sensors. 3D depth sensors, such as Velodyne LiDAR, have proved in the last 10 years to be very useful to perceive the environment in autonomous driving, but few methods exist that directly use these 3D data for odometry. We present a new low-dr...

متن کامل

6DOF SLAM with Stereo-in-hand

In this paper we describe a system that carries out SLAM using a stereo pair moving with 6DOF as the only sensor. Textured point features are extracted from the images and stored as 3D points if seen in both images with sufficient disparity, or stored as inverse 3D points otherwise. This allows the system to make use of both near and far features that provide distance and orientation, or orient...

متن کامل

On-Board Dual-Stereo-Vision for the Navigation of an Autonomous MAV

We present a quadrotor Micro Aerial Vehicle (MAV) equipped with four cameras, which are arranged in two stereo configurations. The MAV is able to perform stereo matching for each camera pair on-board and in real-time, using an efficient sparse stereo method. In case of the camera pair that is facing forward, the stereo matching results are used for a reduced stereo SLAM system. The other camera...

متن کامل

Stereo Image Point Cloud and Lidar Point Cloud Fusion for the 3d Street Mapping

Combining active and passive imaging sensors enables creating a more detailed 3D model of the real world. Then, these 3D data can be used for various applications, such as city mapping, indoor navigation, autonomous vehicles, etc. Typically, LiDAR and camera as imaging sensors are installed on these systems. Both of these sensors have advantages and drawbacks. Thus, LiDAR sensor directly provid...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013