Phase purity of sol-gel-derived hydroxyapatite ceramic.
نویسندگان
چکیده
Calcium oxide was reported in the sol-gel-derived hydroxyapatite (HA) as an unavoidable major impurity. In this study phase purity of HA synthesized by sol-gel route was explored using precursors of calcium nitrate tetrahydrate and triethyl phosphate. Two different drying methods, the fast drying of as-prepared precursors and the slow drying of aged precursors were adopted as major processing variables. The dried gels were subsequently calcined up to 600 degrees C. In the calcined powder from fast-dried gel, X-ray diffraction (XRD) patterns revealed an intense CaO peak. For the slow-dried gel, thermogravimetric analysis revealed a 2-step weight-loss behavior during heating. XRD analysis of the calcined powder, corresponding to the second weight-loss step, showed major peaks of hydroxyapatite and a very weak CaO peak. P-31 NMR analysis indicated formation of calcium phosphate complex during aging. Complete incorporation of Ca(NO3)2 into the complex due to proper aging therefore diminishes CaO formation. It was also found that the minor CaO derived in the slow drying method can be easily and completely washed out just by distilled water.
منابع مشابه
Effects of MWCNTs Dispersion on the Microstructure of Sol-Gel Derived Hydroxyapatite
Stable homogeneous dispersions of carbon nanotubes (CNTs) were prepared using ethanol as dispersing agent. Then, using sol-gel method, dispersion in the hydroxyapatite matrix and its effects on the microstructure were investigated. The phase composition, chemical structure and morphological and size analyses were performed using XRD, FT-IR, SEM, TEM/SAED/EDX and Raman spectroscopy. The influenc...
متن کاملInvestigation and comparison of calcium aluminate phases obtained by three methods of sol-gel (with EDTA), sol-gel (without EDTA) and solid-phase synthesis
In this study, we investigate calcium aluminate phases that were prepared by three different solid phase synthesis methods and a sol-gel method (with and without EDTA). The purpose of this study is to compare these three methods in terms of achieving higher purity, optimal phase and complexity in the production of the final product. Comparing the results, we found that the sol-gel method is mo...
متن کاملSol-gel synthesis of FHA / CDHA nanoparticles with a nonstochiometric ratio
The aim of this study was to investigate the sol gel synthesis of HA/FA nanoparticles and the possible formation of TCP phase or unstoichiometric calcium deficient hydroxyapatite (CDHA) from the precursors with a Ca/P ratio of 1.62. In order to prepare the sol, the solutions of Triethyl phosphite, ammonium fluoride and calcium nitrate in ethanol were used respectively as P, F and Ca precursors....
متن کاملKinetic Study of the Electrocatalytic Oxidation of Acetaldehyde at Ni/Al Layered Double Hydroxide Modified sol-gel derived carbon ceramic electrode
In this research, we reported a novel modified carbon ceramic electrode (CCE) using Ni/Al Layered double hydroxide as modifier was fabricated by sol-gel technique. The Ni/Al Layered double hydroxide modified sol gel derived carbon ceramic (Ni/Al LDH-SGD-CC) electrode was used for electrocatalytic oxidation of acetaldehyde. The oxidation of acetaldehyde happens at the potential where Ni (III) sp...
متن کاملCrystallization Kinetics of Hydroxyapatite Nano-films on Stainless Steel Through a Sol-Gel Process
This article describes the preparation and analysis of nano hydroxyapatite (HA) films on stainless steel 316L through sol-gel technique. The process started with preparation of a nitrate and phosphate sol. After aging the sol for 24 h at room temperature a SS316 substrate was dip-coated and heat-treated at 350 to 450 °C for different times in air. The coating phase and structure on subs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Biomaterials
دوره 22 19 شماره
صفحات -
تاریخ انتشار 2001