Bidirectional Battery Charger for PV Using Interleaved Fourport DC-DC Converter

نویسندگان

  • A. Elamathy
  • G. Vijayagowri
  • V. Nivetha
  • K. S. Rangasamy
چکیده

In this paper, a four-port bidirectional dc-dc converter is proposed for grid-interactive photovoltaic (PV) system application. The four-phase topology is suitable for residential pumping, aerospace power requirements. The control of battery and different capacities of PV modules are naturally decoupled. In addition, the port interface with PV is current type which can implement maximum power point tracking (MPPT) and soft switching under wide variation of PV terminal voltage. Finally, simulation results are proposed to verify the power control in different operation modes.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Control and Analysis of an Integrated Bidirectional DC/AC and DC/DC Converters for Plug-In Hybrid Electric Vehicle Applications

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, w...

متن کامل

PV Charger System Using A Synchronous Buck Converter

The paper describes the design, simulation and practical implementation of a PV system specifically designed for battery charging applications. A DC-DC synchronous Buck converter is digitally controlled by a dsPIC33F to extract the maximum power from the PV panel and feed it to the battery, according to the data received through the sensors. The system proves to be stable to rapid weather chang...

متن کامل

An Integrated Multifunctional Bidirectional AC/DC and DC/DC Converter for Electric Vehicles Applications

Abstract: This paper presents an on-board vehicular battery charger that integrates bidirectional AC/DC converter and DC/DC converter to achieve high power density for application in electric vehicles (EVs). The integrated charger is able to transfer electrical energy between the battery pack and the electric traction system and to function as an AC/DC battery charger. The integrated charger to...

متن کامل

A Power Conversion System using the Renewable Energies for HEV Charger

With a development of Hybrid Electric Vehicle(HEV), A photovoltaic(PV) generation system is used for charging batteries in many cases. A dc/dc converter using PV power for a battery charger requires a high efficiency. In this paper, A ZVS boost converter using the renewable energies for HEV charger is proposed. Through the theoretical analysis and experimental result, operation modes and charac...

متن کامل

Soft Switching Buck Converter for Battery Charging With MPPT

Photovoltaic power generation system implements an effective utilization of solar energy, but generally has very low conversion efficiency. Maximum power point tracking (MPPT) is used in photovoltaic (PV) systems to maximize the photovoltaic array output power, irrespective of the temperature and irradiation conditions and of the load electrical characteristics. A MPPT system has been developed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015