J. Michalik, C. Kolmasiak Physical Modeling of Stresses during Continuous Casting of St3s Steel
ثبت نشده
چکیده
During the continuous casting process, a nonstationary stress state forms in the metal, which is caused by a non-uniform temperature distribution, phase transitions, and the deformation of the stock in a semi-liquid state. Stresses occur also as a results of ferrostatic pressure and the deflection and straightening of the continuous casting. In addition to these phenomena, intensive processes of stress relaxation occur in the metal. A prerequisite for obtaining an accurate model of stresses in the metal during continuous casting is to take these phenomena into account. The equations of the model developed are presented in works 1-4 . The numerical analysis carried out in the work was based on the actual conditions of the continuous casting process in a Polish steel mill. Conditions of the mathematical and physical modelling of the process were selected for a 300×400 mm casting of St3S steel. The aim of the study was to physically model the processes of stress formation and relaxation in metal during continuous casting. Variations in temperature and strain rate at the characteristic points of the casting cross-section were obtained by using the mathematical model of the thermomechanical state of metal. From computer simulation, conditions for physical modelling on the GLEEBLE 3800 simulator were determined. This machine enables the modelling of the influence of temperature and strain factors on the metal within a wide range of variation of thermomechanical parameters.
منابع مشابه
Physical Modeling of Steel Delivery during Thin Slab Continuous Casting
A full scale physical model of a thin slab caster with a four-hole design submerged entry nozzle (SEN) was constructed. On the basis of the dimensionless Reynolds and Froude similitude criteria, the fluid flow in a full-scale model is similar to that of the actual system and, hence, the data obtained from the water model can be applied to the actual system. In order to determine the optimum ope...
متن کاملMathematical Modeling of Heat Transfer for Steel Continuous Casting Process
Heat transfer mechanisms and the solidification process are simulated for a continuous casting machine and the geometric shape of the liquid pool is predicted considering different conditions. A heat transfer and solidification model is described for the continuous casting of steel slabs. The model has been established on the basis of the technical conditions of the slab caster in the con...
متن کاملA Hybrid Modeling for Continuous Casting Scheduling Problem
This paper deals with a multi-agent-based interval type-2 fuzzy (IT2F) expert systemfor scheduling steel continuous casting. Continuous caster scheduling is a complex and extensiveprocess that needs expert staff. In this study, a distributed multi-agent-based structure is proposed as asolution. The agents used herein can cooperate with each other via various communication protocols.To facilitat...
متن کامل