Nanoenergetic materials: boron nanoparticles from the pyrolysis of decaborane and their functionalisation.
نویسندگان
چکیده
The surfaces of boron nanoparticles 10-150 nm in diameter, prepared by gas phase pyrolysis of decaborane vapour at 1 atm and 700-900 degrees C, can be halogenated by treatment with Br2 or XeF2; the surface halogenation somewhat increases the onset temperature for the oxidation of the particles under O2.
منابع مشابه
High-pressure high-temperature synthesis and structure of α-tetragonal boron.
Microcrystals of α-tetragonal (α-t) boron with unit cell parameters a=9.05077(6) and c=5.13409(6) Å and measured density 2.16-2.22 g cm-3 were obtained by pyrolysis of decaborane B10H14 at pressures of 8-9 GPa and temperatures of 1100-1600 ○C. The crystal structure is in good agreement with the model proposed by Hoard et al (1958 J. Am. Chem. Soc.80 4507). However, compared to the original mode...
متن کاملSyntheses of Boron Nitride Nanotubes from Borazine and Decaborane Molecular Precursors by Catalytic Chemical Vapor Deposition with a Floating Nickel Catalyst
Multiand double-walled boron nitride nanotubes (BNNTs) have been synthesized with the aid of a floating nickel catalyst via the catalytic chemical vapor deposition (CCVD) of either the amineborane borazine (B3N3H6) or the polyhedral-borane decaborane (B10H14) molecular precursors in ammonia atmospheres. Both sets of BNNTs were crystalline with highly ordered structures. The BNNTs grown at 1200 ...
متن کاملMATERIALS CHEMISTRY COMMUNICATION Nitrogen-containing carbon nanotubes
could be prepared by employing appropriate precursor molecules. Nanotubes containing both boron and nitrogen have Carbon nanotubes containing small amounts of nitrogen are been grown in the electric arc discharge between graphite produced by the pyrolysis of aza-aromatics such as pyridine, cathodes and graphite anodes filled with boron in a nitrogen methylpyrimidine and triazine over cobalt nan...
متن کاملInvestigation of the effect of Argon flow on the morphology of B4C nanoparticles synthesized by the VLS method
In this paper, new various morphologies of boron carbide were successfully synthesized using carbon black, activated carbon and boron oxide precursors as well as using cobalt nanoparticles as catalysts. Almost the whole morphology of synthesized boron carbide are consisted of smooth nanowires and nanobelts. With decreasing the carbon black particles size from 29 nm to 13 nm (29, 23, 17 and 13),...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 22 شماره
صفحات -
تاریخ انتشار 2009