High Voltage Power Supply for Electro-optics Applications
نویسندگان
چکیده
This paper describes the development of high voltage power supply for electro-optics applications. The power supply consists of MOSFET driver, voltage multiplier circuit and voltage controller. A single timer 555 generates 1.3 kHz square pulse to drive the power MOSFET that connected to a standard step up transformer. By using voltage multiplier technique, the output from secondary transformer was step-up. The variable DC high voltage output is produced up to 4 kV. The input voltage as low as 12 volt is required to generate smooth and stable high voltage output.
منابع مشابه
A Low-Voltage, Low-Power, Two-Stage Amplifier for Switched-Capacitor Applications in 90 nm CMOS Process
Abstract- A novel low-voltage two-stage operational amplifier employing resistive biasing is presented. This amplifier implements neutralization and correction common mode stability in second stage while employs capacitive dc level shifter and coupling between two stages. The structure reduces the power consumption and increases output voltage swing. The compensation is performed by simple mill...
متن کاملHigh gain multi-input DC-DC converter with combined phase-shift/PWM modulation for stand-alone applications
The existence of unreliable renewable energy resources would be required to use energy resources and storage units simultaneously, particularly in applications such as electrical vehicles and stand-alone energy supplying systems. The objective of this paper is to introduce a new topology of multi input converter in hybrid power supply system of photovoltaic, fuel cell and battery for medium pow...
متن کاملAn Ultra High CMRR Low Voltage Low Power Fully Differential Current Operational Amplifier (COA)
this paper presents a novel fully differential (FD) ultra high common mode rejection ratio (CMRR) current operational amplifier (COA) with very low input impedance. Its FD structure that attenuates common mode signals over all stages grants ultra high CMRR and power supply rejection ratio (PSRR) that makes it suitable for mixed mode and accurate applications. Its performance is verified by HSPI...
متن کاملSwitched-Capacitor Dynamic Threshold PMOS (SC-DTPMOS) Transistor for High Speed Sub-threshold Applications
This work studies the effects of dynamic threshold design techniques on the speed and power of digital circuits. A new dynamic threshold transistor structure has been proposed to improve performances of digital circuits. The proposed switched-capacitor dynamic threshold PMOS (SC-DTPMOS) scheme employs a capacitor along with an NMOS switch in order to effectively reduce the threshold voltage of ...
متن کاملReduction of Switched Mode Power Supply Electro‐Magnetic Emissions in Automotive Cockpit Applications by Using of a Field Programmable Gate Array to Implement Pseudo Random Spread Spectrum Modulation
Introduction At the heart of automotive design is the requirement to pass Electro-Magnetic Compatibility (EMC) limits, by minimising conducted and radiated emissions and susceptibility. The use of Switched Mode Power Supplies (SMPS) is now common-place, yet a prime source of electro-magnetic emissions. Minimising these emissions is a key goal of SMPS design. Use of spread spectrum techniques is...
متن کامل