A study of alternative formulations for optimization of structural and mechanical systems subjected to statics and dynamic loads
نویسندگان
چکیده
Approved: _____________________________________ Thesis Supervisor _____________________________________ Title and Department _____________________________________ Date A STUDY OF ALTERNATIVE FORMULATIONS FOR OPTIMIZATION OF STRUCTURAL AND MECHANICAL SYSTEMS SUBJECTED TO STATIC AND DYNAMIC LOADS
منابع مشابه
A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads
The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...
متن کاملTOPOLOGY OPTIMIZATION OF STRUCTURES UNDER TRANSIENT LOADS
In this article, an efficient methodology is presented to optimize the topology of structural systems under transient loads. Equivalent static loads concept is used to deal with transient loads and to solve an alternate quasi-static optimization problem. The maximum strain energy of the structure under the transient load during the loading interval is used as objective function. The objective f...
متن کاملNonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads
In this paper, the first-order shear deformation theory is used to derive theoretical formulations illustrating the nonlinear dynamic response of functionally graded porous plates under thermal and mechanical loadings supported by Pasternak’s model of the elastic foundation. Two types of porosity including evenly distributed porosities (Porosity-I) and unevenly distributed porosities (Porosity-...
متن کاملComparative study between dynamic transient and degree-hours methods to estimate heating and cooling loads of building’s wall
In this paper, dynamic transient method and conventional degree-hours method (static) have been compared to estimate heating and cooling loads of building’s wall. All main wall surfaces of various orientations, i.e.South, West, East, North, and horizontal are considered in the climate of Tehran, Iran. In this study, a conventional wall structure, which is comprisedconcrete as main wall material...
متن کاملSTRUCTURAL ANALYSIS AND STRUCTURAL OPTIMIZATION OF SELF-SUPPORTING TRUSS TOWERS TO SUPPORT A LARGE WIND TURBINE
This article aims to study the self-supporting truss towers used to support large wind turbines. The goal is to evaluate and validate numerically by finite element method the structural analysis when the lattice structures of the towers of wind turbines are subjected to static loads and these from common usage. With this, it is expected to minimize the cost of transportation and installation of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2015