Computational study of the fluid-dynamics in carotids before and after endarterectomy.
نویسندگان
چکیده
In this work, we provide a computational study of the effects of carotid endarterectomy (CEA) on the fluid-dynamics at internal carotid bifurcations. We perform numerical simulations in real geometries of the same patients before and after CEA, using patient-specific boundary data obtained by Echo-Color Doppler measurements. We analyze four patients with a primary closure and other four where a patch was used to close arteriotomies. The results show that (i) CEA is able to restore physiological fluid-dynamic conditions; (ii) among the post-operative cases, the presence of patch leads to local hemodynamic conditions which might imply a higher risk of restenosis in comparison with the cases without patch.
منابع مشابه
Study of geometric shape and water circulation pattern in fish tanks using computational fluid dynamics
Providing comfort conditions for fish from the point of view of velocity uniformity and flow regime is one of the most important requirements of aquaculture improving the production conditions. In this research, for this purpose, by using computational fluid dynamics, Fluent software and k-ɛ turbulence model, the geometrical shape and pattern of water circulation in a fish breeding pond have be...
متن کاملComputational fluid dynamics study and GA modeling approach of the bend angle effect on thermal-hydraulic characteristics in zigzag channels
In the study, the thermal-hydraulic performance of the zigzag channels with circular cross-section was analyzed by Computational Fluid Dynamics (CFD). The standard K-Ꜫ turbulent scalable wall functions were used for modeling. The wall temperature was assumed constant 353 K and water was used as the working fluid. The zigzag serpentine channels with bend angles of 5 - 45° were studied for turbul...
متن کاملInvestigation of stepped planning hull hydrodynamics using computational fluid dynamics and response surface method
The use of step at the bottom of the hull is one of the effective factors in reducing the resistance and increasing the stability of the Planning hull. The presence of step at the bottom of this type of hulls creates a separation in the flow, which reduces the wet surface on the hull, thus reducing the drag on the body, as well as reducing the dynamic trim. In this study, a design space was cre...
متن کاملComparison of Heat Transfer Power of the Cooling Panel with Square Cross Section and Circular Cross Section in Electric Arc Furnaces Steelmaking by the use of Computational Fluid Dynamics
Steel pipes with circular cross-sections are usually used in cooling panels of electric arc furnaces. In the present study pipes with square cross-sections under equivalent conditions were used to obtain more information on the possibility of increasing the heat transfer and cooling efficiency. The results showed increased efficiency of the square pipe compared to the circular cross-section pip...
متن کاملComputational Fluid Dynamics Study of a Complete Coal Direct Chemical Looping Sub-Pilot Unit
The present Computational Fluid Dynamics (CFD) work deals with the modeling of complete coal direct chemical looping sub-pilot unit which use coal as fuel and ferric oxide supported on alumina as an oxygen carrier. The 2D CFD model of the complete arrangement incorporating both fuel and air reactors and their inter-connecting parts was solved using FLUENT. The CFD model wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Journal of biomechanics
دوره 49 1 شماره
صفحات -
تاریخ انتشار 2016