Linear bubble model of abnormal grain growth
نویسندگان
چکیده
A linear bubble model of grain growth is introduced to study the conditions under which an isolated grain can grow to a size much larger than the surrounding matrix average (abnormal growth). We first consider the case of bubbles of two different types such that the permeability of links joining unlike bubbles is larger than that of like bubbles (a simple model of grain boundary anisotropy). Stable abnormal growth is found both by mean field analysis and direct numerical solution. We next study the role of grain boundary pinning (e.g., due to impurities or precipitate phases) by introducing a linear bubble model that includes lower and upper thresholds in the driving force for bubble growth. The link permeability is assumed finite for driving forces above the upper threshold, zero below the lower threshold, and hysteretic in between. Abnormal growth is also observed in this case.
منابع مشابه
The implications of piecewise linear process of normal accruals
The present study investigates whether the basic assumption in the Jones model, which normal accruals are a linear function of change in sales, is empirically valid. It also discusses and addresses the implications of the assumption violation in the earnings management detection tests. The research employs a sample of 2832 observations of the annual information of firms listed in Tehran Stock E...
متن کاملOn abnormal subgrain growth and the origin of recrystallization nuclei
Abnormal subgrain growth has been proposed as the nucleation mechanism for recrystallization. To test this hypothesis, Monte Carlo Potts model simulations of subgrain growth were performed on single-phase, strain-free subgrain structures with experimentally validated microstructure, texture, boundary character, and boundary properties. Results indicate that abnormal growth events emerge spontan...
متن کاملModelling of Grain Growth Kinetics in Porous Ceramic Materials under Normal and Irradiation Conditions
Effect of porosity on grain growth is both the most frequent and technologically important situation encountered in ceramic materials. Generally this effect occurs during sintering, however, for nuclear fuels it also becomes very important under reactor irradiation conditions. In these cases pores and gas bubbles attached to the grain boundaries migrate along with the boundaries, in some circum...
متن کاملMesoscale model for fission-induced recrystallization in U-7Mo alloy
A mesoscale model is developed by integrating the rate theory and phase-field models and is used to study the fission-induced recrystallization in U-7Mo alloy. The rate theory model is used to predict the dislocation density and the critical size and density of the recrystallized nuclei due to irradiation. The predicted fission rate and temperature dependences of the dislocation density are in ...
متن کاملRelating Grain-Boundary Complexion to Grain-Boundary Kinetics I: Calcia-Doped Alumina
Because of the complex nature of internal interfaces it has been a continual challenge to link the grain growth behavior of alumina (especially the onset of abnormal grain growth) to the internal interface structure and chemistry, and the associated atomic transport rate. The present work considers the problem of normal and abnormal grain growth development in calcia-doped alumina, a system not...
متن کامل